Wiltshire · England
Bath chip & crack repair in Corston, Wiltshire
Our technicians come to Corston for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Snagging damage from a refit
- A cracked acrylic bath
Repair or replace in Corston?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
What you get with us
- No need to remove anything
- We will tell you if it’s not worth repairing
- No extra charge for your area
- Colour-matched on site
See our prices page or guide to resurfacing and replacement costs.
Bath repair in Corston without replacing anything
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. We regularly repair roll-top & freestanding, whirlpool & spa baths and acrylic, and common reasons people get in touch are impact holes in acrylic and chips under the taps.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Corston (SN16)
- Area hub
- Wiltshire
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Corston
Corston is about 7 miles north of Chippenham, in Wiltshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 425 towns and villages in Wiltshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 64 miles away.
We cover every part of SN16. We regularly work on streets such as Main Road, Radnor Park and Southside Close and the roads around them. Nearby, we also work in Bremilham (2 miles north-west), Lower Stanton St Quintin (2 miles south), Hullavington (2 miles south-west), Foxley (2 miles north-west) and Norton (2 miles west). We also work in nearby towns such as Chippenham (7 miles south), Calne (9 miles south-east), Devizes (15 miles south), Melksham (12 miles south), Corsham (9 miles south-west) and Bradford-on-Avon (15 miles south-west).
What’s near Corston
In Corston, that means homes near The Radnor Arms, Malmesbury School and Church of All Saints and the streets around them. Nearby you will also find Tetbury Hospital (5.9 miles north) and Malmesbury Castle (2.2 miles north).
Common questions in Corston
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you repair something that is been repaired before?
Generally, yes. Tell us what was done before and we will plan for it.
Do you work in Corston?
We do. We send a technician to Corston for every job, and the price is the same as everywhere else.
Can you quote from photos?
Nearly always. If pictures do not show enough, we’ll ask for another angle.
Is my repair covered?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
When a repair is not the answer
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- Metal that has corroded all the way through
- Leaking fittings, which need a plumber
- Wear across the entire surface, which needs re-enamelling
Send us photos and we will tell you honestly.
Surfaces we repair
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
Can I fix it myself?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
How to look after the repair
Most damage we see is avoidable. These habits help:
- Keep abrasive pads and gritty cleaners away from the bath
- Do not leave a fresh chip for long
- Fix dripping taps early to stop staining and limescale
- Rinse it down after each bath
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Nearby places to Corston
What else we do in Corston
When to call us in Corston
Rust typically starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Typical reasons for a call-out include:
- Deep scratches in acrylic
- Rusty patches near the plughole
- Hairline or through cracks in acrylic
- A chip where the taps sit
Comparing quotes
- How long the guarantee is and what it covers
- How to look after the finish
- A fixed quote, and whether VAT is included
- What prep work is covered
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the next day.
How to prepare
- Ensure the area is dry
- Clear toiletries, mats and anything else from around the area
- Keep pets and children out of the room while we work
Getting a price
Most clients in Corston get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
How we price bath repair
Repairs from £95. There is no area surcharge for Corston. What changes the price is:
- How hard the colour is to match
- How easy the damage is to reach
- What kind of damage it is
- The material and finish
Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Send pictures for a quote
Phone pictures are fine, there’s no need for anything special. Ensure they show:
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
- Natural light rather than flash
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
About our accreditations · Every repair comes with a one-year guarantee.
