Moray · Scotland
Bath Repair in Covesea
Bath repair in Covesea without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- Chips along the edge of the bath
- Chips caused by builders
Common problems we fix in Covesea
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
You may need us if you’ve spotted any of these:
- Cracks in an acrylic bath
- Damage beneath the taps
- Rust by the waste and overflow
- Holes from dropped items
What to look for in a quote
- What happens if the damage is worse than the photos show
- What prep work is covered
- Is the price fixed, and does it include VAT?
- What aftercare is recommended
How we handle bath repair in Covesea
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. If you are dealing with holes from dropped items and scuffs and scratches in the surface, we can help.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Covesea (IV31)
- Area hub
- Moray
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Covesea
More services for Covesea
Prices and what affects them
Repairs from £95. We give every job a fixed quote from photos. These are the things that affect it:
- How easy the damage is to reach
- How hard the colour is to match
- How much damage there is
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Quotes from your pictures
Two or three clear pictures are usually enough. It helps if you send:
- Any earlier repairs or coatings
- A photo taken from further back
- The material, if you know it
- A coin beside the damage so we can judge size
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Where we work around Covesea
Covesea is about 5 miles north of Elgin, in Moray. Jobs in Covesea are booked in like any other job: a fixed price from your pictures, then a visit to do the work. We work in 58 places in Moray.
Our visits in IV31 work the same way as everywhere else we cover. If you’re just outside Covesea, we cover Lossiemouth (2 miles east), Muirton (2 miles south-east), Duffus (3 miles south-west), Hopeman (4 miles west) and Backlands (4 miles west). Larger places within reach include Elgin (5 miles south), Buckie (14 miles east), Forres (13 miles south-west), Ashgrove (6 miles south), Burghead (6 miles west) and Fochabers (12 miles south-east). If you are somewhere remote, call first so we can plan the visit.
Near you in Covesea
Around Covesea, we work in homes near Lossiemouth High School and James Square, among other places. Well-known places in the area include Spynie Hospital (4.3 miles south) and Lossiemouth Fisheries and Community Museum (2 miles east). For a walk, there is Loch Spynie.
The process
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to a morning or an afternoon, including clearing up.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Make sure the area is dry
- Clear the area around the damage
- Open a window if you can
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Advice
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
When we would advise against a repair
A repair is not right for every job, including:
- Wear across the entire surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we cannot get to from below
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us pictures and we will tell you honestly before you book.
Materials we work on in Covesea
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Why repair rather than replace?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why Covesea clients choose us
- One visit for most repairs
- Every repair guaranteed for a year
- We will tell you if it’s not worth repairing
- Nothing taken out or refitted
See our pricing or guide to resurfacing and replacement costs.
Landlords, agents and businesses in Covesea
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
For anyone letting property in or around Covesea, we’ll quote for several properties at once. Send pictures for each one and we will price them together.
Your questions about bath repair in Covesea
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Moray.
When can I have a bath again?
Most baths can be used the following day. We confirm the time before we leave.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Are there extra charges for Covesea?
There is no separate call-out charge. Your fixed quote includes everything.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
What areas do you cover?
The entire UK, including all of Moray. Just include your postcode and we will confirm dates.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
About our accreditations · Every repair comes with a one-year guarantee.
