Cheshire West and Chester · England
Bath Repair in Crewe-by-Farndon
Fixed-price bath repair in Crewe-by-Farndon and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Damage done while the bathroom was being fitted
- A kit repair that didn’t last
About our bath repair in Crewe-by-Farndon
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in a single visit. We work on whirlpool & spa baths, pressed steel enamel and acrylic, and people most frequently call us about chips along the edge of the bath and rusty patches near the plughole.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Crewe-by-Farndon (CH3)
- Area hub
- Cheshire West and Chester
- Cover
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Crewe-by-Farndon questions
What areas do you cover?
Across the UK, so Crewe-by-Farndon is covered. Our prices are the same everywhere.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Can a cracked acrylic bath be fixed?
Often, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Crewe-by-Farndon.
What information do you need?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Will I be able to see the repair?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
What affects the price in Crewe-by-Farndon
Prices start from £95. We price every job individually, from your photos. What matters most is:
- How easy the damage is to reach
- How much damage there is
- The material and finish
- The type of damage
A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
How to get a fixed price
Almost every job we do is priced from pictures. This is what we need:
- A wider photo showing the entire bath
- Details of any past repairs
- Your postcode, so we can check dates
- Any details about the material
To get a price, send a couple of pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Landlord and trade work in Crewe-by-Farndon
If you manage property in Crewe-by-Farndon, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
We carry out planned and one-off repairs for housing associations and facilities teams in Cheshire West and Chester and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Our work in Crewe-by-Farndon
Crewe-by-Farndon is about 5 miles east of Wrexham, in Cheshire West and Chester. We visit homes and businesses in Crewe-by-Farndon and nearby villages, so nothing has to leave your home. We cover all 224 towns and villages in Cheshire West and Chester. You can also see our page for Liverpool, about 23 miles away.
Our repair technicians cover all of the CH3 postcode area. Nearby, we also work in Holt (1 mile west), Farndon (1 mile north-west), Stretton (2 miles east), Barton (2 miles east) and Coddington (2 miles north-east). Within a short drive, we also cover Chester (8 miles north), Ellesmere Port (14 miles north), Boughton (8 miles north), Hoole (9 miles north), Whitby (14 miles north) and Newtown (9 miles north).
Around Crewe-by-Farndon
In Crewe-by-Farndon, that means homes near Hand & Heart Hotel, St Chad's Church and Holt's Community Primary School, among other places. A little further out are Holt Castle (0.7 miles north-west) and Trevalyn Manor (3.9 miles north-west). For a walk, there is Bickerton Hill and Pant-yr-ochain Big Pool.
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- Dust sheets down, tidy finish
- Colours mixed by hand to suit your surface
- A fixed quote before booking
- Technicians who travel to you, UK-wide
Take a look at our full price list or resurfacing vs replacement cost guide.
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Do not scrub with anything abrasive
- Rinse it down after each bath
- Stick to mild cleaners and a soft cloth
- Put a towel in the bath if you’re working above it
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
How the visit works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes two to three hours for most chips. We clean up when we’re done and tell you when it’s ready to use.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the next day, the bath is ready to use.
How to prepare
- Mention any earlier repairs or resurfacing
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
Ask for a price
Upload photos of the damage and one of the whole item, and tell us you are in Crewe-by-Farndon, and we will reply with a fixed quote.
Related advice
What else we do in Crewe-by-Farndon
What we are called out for in Crewe-by-Farndon
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
These are the problems we’re asked about most:
- Chips under the taps
- A cracked acrylic bath
- Chips on the rim or sides
- Rust by the waste and overflow
What your quote should include
- How long the guarantee is and what it covers
- How to care for the finish
- When it can be used again
- Whether they match the colour on site
When we would advise against a repair
Before booking, it’s worth knowing the limits:
- A bath that moves underfoot, until its support is fixed
- Wear across the entire surface, which needs re-enamelling
- Cracks in acrylic we can’t reach from underneath
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
