Wrexham · Wales
Bath chip & crack repair in Holt, Wrexham
Bath repair in Holt without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
Bath repair at your home in Holt
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath. Most baths can be used again the following day. If you’re dealing with impact holes in acrylic and an old repair that has yellowed or come loose, we can normally put it right, on whirlpool & spa baths, pressed steel enamel and acrylic alike.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Location
- Holt (LL13)
- County
- Wrexham
- Cover
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath repair
Repairs from £95. A fixed quote means you know the cost before booking. We look at:
- How easy the damage is to reach
- The colour and finish to match
- How many items we do on one visit
- What kind of damage it is
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your pictures
You can usually get a fixed price without us visiting. To help us price it:
- One picture of the entire bath
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- Details of any past repairs
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Why repair rather than replace?
Many people think a damaged bath means a new one. In most cases it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why book with us
- Nothing taken out or refitted
- Repair technicians who travel to you, UK-wide
- A fixed quote before booking
- Dust sheets down, tidy finish
Read our pricing or bath cost comparison.
Repairs by material
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Your questions about bath repair in Holt
What happens next?
We come back with a fixed price, generally with dates to choose from. You are under no obligation.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can I get a quote without a visit?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will the price change on the day?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Are there extra charges for Holt?
No. Our quotes include travel, and we charge the same wherever you are.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
Aftercare tips
Once the work has cured, treat it gently:
- Ensure an acrylic bath is firm underfoot
- A dripping tap stains enamel, so fix it early
- Protect the bath with a towel when doing jobs nearby
- Have new chips seen to early
There is nothing special to do after a repair, beyond gentle cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.
What we cannot put right
A repair isn’t right for every job, for example:
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
- Acrylic cracks with no access behind them
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Holt and nearby
Holt is about 5 miles north-east of Wrexham, in Wrexham. We travel to homes and businesses in Holt, so nothing has to leave your home. We work in 115 places in Wrexham. You can also see our page for Liverpool, about 23 miles away.
All of LL13 is within our area. Whether you live on Castle Street, Fairview and Castle Mews or a nearby road, a technician can come to you. Close by, we cover Farndon (1 mile north-east), Crewe-by-Farndon (1 mile east), Stretton (2 miles east), Barton (2 miles east) and Coddington (3 miles north-east). Within a short drive, we also cover Wrexham (5 miles south-west), Caia Park (4 miles south-west), Offa (6 miles south-west), Rhosllannerchrugog (8 miles south-west), Rhosddu (5 miles west) and Acton (4 miles west).
Landmarks near Holt
We visit homes around Hand & Heart Hotel, Holt English Presbyterian Church and Holt's Community Primary School, among other places. A little further out are Holt Castle (less than half a mile east) and Trevalyn Manor (3.1 miles north-west). Green spaces nearby include Pant-yr-ochain Big Pool and Wilderness Tip (Gresford).
Other services in Holt
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
The process
We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a few hours, and the room is left clean and tidy.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Open a window if you can
Getting a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
Related advice
Landlords, agents and businesses in Holt
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Landlords, letting agents and housing providers in Holt use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
About our accreditations · Every repair comes with a one-year guarantee.
