North Lanarkshire · Scotland
Bath Repair in Crindledyke
Damaged bath in Crindledyke? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Rusty patches near the plughole
- A cracked acrylic bath
About our bath repair in Crindledyke
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We’re frequently asked to fix hairline or through cracks in acrylic and impact holes in acrylic, across pressed steel enamel, roll-top & freestanding and whirlpool & spa baths.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Crindledyke (ML2)
- County
- North Lanarkshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Water coming from the waste or taps rather than the bath
- Cracks in parts of an acrylic bath we cannot get to from below
- Metal that has corroded all the way through
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
Prices and what affects them
Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:
- How many areas need work
- Previous DIY repairs that have to come out
- How many items we do on one visit
- The material
Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- What it’s made of, if you know
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
How it works
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and the work begins. It normally takes two to three hours for most chips, and we’ll tell you if anything changes.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Preparing for the visit
- Clear the area around the damage
- Have a window or extractor fan available
- Point us to the nearest place to park
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Read more
Covering Crindledyke
Crindledyke is about 2 miles east of Wishaw, in North Lanarkshire. Wherever you are in the ML2 postcode area, we come to you. We cover all 89 towns and villages in North Lanarkshire, from the larger towns to small villages. Our nearest city page is Glasgow, about 16 miles away.
Our visits in ML2 are booked in the same way as anywhere else. We regularly work on streets such as Firtree Place, Alcath Road and Bonkle Road and the roads around them. Nearby, we also work in Newmains (1 mile west), Bonkle (1 mile north-east), Morningside (1 mile south), Cambusnethan (1 mile south-west) and Chapel (1 mile south). Within a short drive, we also cover Motherwell (4 miles west), Cumbernauld (12 miles north-west), Coatbridge (8 miles north-west), Airdrie (7 miles north-west), Bellshill (6 miles west) and Kilsyth (15 miles north-west).
Local landmarks in Crindledyke
Typical jobs here are in homes near Bonkle Parish Church and Coltness High School. For rail, the closest station is Cleland station, about 1.9 miles north-west. Further afield, we also cover the area around Shotts Heritage Centre (3.8 miles north-east) and Murdostoun Castle (0.5 miles north). For a walk, there’s Baron's Haugh RSPB Reserve and Allanton House lake.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Your questions about bath repair in Crindledyke
Can you repair a hole in a bath?
In most cases. Send us a photo of the hole and one from under the bath if you can.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
How invisible is a bath repair?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference.
Which areas do you work in?
The whole UK, including all of North Lanarkshire. Send your postcode with your pictures and we’ll confirm dates.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one.
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Also near Crindledyke
Also in Crindledyke
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
How to care for the repair
Most damage we see is avoidable. A few tips:
- Protect the bath with a towel when doing jobs nearby
- A dripping tap stains enamel, so fix it early
- Have new chips seen to early
- Store metal items away from the bath
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
For landlords and businesses
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Why repair rather than replace?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why book with us
- One price list for the entire UK
- Fixed prices from your photos
- Every repair guaranteed for a year
- Typically one visit, start to finish
Take a look at our full price list and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
