Aberdeenshire · Scotland
Bath Repair for Crossroads homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Crossroads. Free, fixed quotes from your pictures.
- Repairs from £95
- A cracked acrylic bath
- Rusty patches near the plughole

Questions from Crossroads
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Do the materials smell?
There can be some smell while we work. It clears as the materials cure.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Can you repair a hole in a bath?
Normally. Photos of the hole and the underside help us check.
Bath repair in Crossroads, done in place
You don’t need a new bath because of a chip. Our technicians fill, shape and refinish the damage, mixing the colour on the day so the repair is hard to spot. We regularly repair roll-top & freestanding, acrylic and cast iron enamel, and the jobs we see most are scuffs and scratches in the surface and a failed DIY repair that’s discoloured or lifting.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

- Area
- Crossroads (AB31)
- Area hub
- Aberdeenshire
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Repairs from £95. Quotes are free and the price is fixed. What we take into account:
- Whether old repairs or coatings need taking off
- The material
- What kind of damage it is
- How hard the colour is to match
A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with no extras added later.
Quotes from your pictures
Phone pictures are fine, there’s no need for anything special. Just make sure we can see:
- One sharp close-up of the damage
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- Details of any past repairs
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Wear across the whole surface, which needs re-enamelling
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in acrylic we cannot reach from underneath
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Other services in Crossroads
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Our work in Crossroads
Crossroads is about 14 miles south-west of Aberdeen, in Aberdeenshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Crossroads is one of 161 places in Aberdeenshire we cover.
Here we cover the AB31 postcode area. We also cover the places around Crossroads: Crathes (1 mile north), Kirkton of Durris (2 miles north-east), Woodlands (3 miles north-east), Balfour (3 miles north-east) and Banchory (3 miles north-west). We also work in nearby towns such as Westhill (9 miles north-east), Stonehaven (9 miles south-east), Kemnay (14 miles north), Laurencekirk (14 miles south), Kintore (14 miles north) and Aboyne (14 miles west).
Near you in Crossroads
A little further out are Crathes Castle (1.9 miles north-west) and Glen O'Dee Hospital (4.3 miles west). For a walk, there is Scolty Hill.
Should you replace it?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why us?
- Colour mixed on the day to match
- Work done at your home or business
- Free fixed quotes from pictures
- Dust sheets down, tidy finish
See our full price list or guide to resurfacing and replacement costs.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours, depending on the damage. If anything looks different from your pictures, we will talk to you before going ahead.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can usually use the bath the day after.
Preparing for the visit
- Clear the area around the damage
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
Ask for a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Aftercare tips
It’s all simple stuff:
- Give the bath a quick rinse after use
- Avoid scourers, wire wool and gritty cream cleaners
- Have new chips seen to early
- Put a towel in the bath if you’re working above it
There’s nothing special to do after a repair, beyond gentle cleaning. Skip bleach and gritty creams and rinse after use.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
When to call us in Crossroads
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
People typically call us when they notice one of these:
- A chipped rim or side
- Damage beneath the taps
- Holes from dropped items
- Rusty patches near the plughole
What to look for in a quote
- Who will actually do the work
- How soon you can use it again
- What the guarantee covers, and for how long
- How the room is protected while they work
About our accreditations · Every repair comes with a one-year guarantee.

