Denbighshire · Wales
Bath chip & crack repair in Cwm, Denbighshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Cwm and across Denbighshire. Free, fixed quotes from your pictures.
- Repairs from £95
- A chip where the taps sit
- Chips on the rim or sides
Bath repair in Cwm without replacing anything
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. We work on roll-top & freestanding, whirlpool & spa baths and acrylic, and common reasons people get in touch are chips under the taps and impact holes in acrylic.
Every repair comes with our one-year guarantee.
- Where
- Cwm (LL18)
- Area hub
- Denbighshire
- Cover
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Looking after the surface is easy:
- A dripping tap stains enamel, so fix it early
- Do not scrub with anything abrasive
- Clean with warm water and a mild detergent
- Cover the bath during DIY or decorating
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Questions from Cwm
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Cwm.
Can you repair a hole in a bath?
Generally. Photos of the hole and the underside help us check.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Towns and villages near Cwm
More services for Cwm
How it works
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Allow a few hours. Before leaving, we tell you when it can be used and how to care for it.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
- Point us to the nearest place to park
How to get a price
Upload photos of the damage and a wider shot of the entire item, with your LL18 postcode, and we will come back with a fixed quote.
Read more
What we cannot put right
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Cracks in parts of an acrylic bath we cannot get to from below
- Wear across the entire surface, which needs re-enamelling
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Common problems we fix in Cwm
Rust usually starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Customers typically contact us about:
- Deep scratches in acrylic
- A failed DIY repair that is discoloured or lifting
- A chip where the taps sit
- A cracked acrylic bath
What your quote should include
- Whether the colour is mixed to match
- Whether cleaning and preparation are in the price
- How the room is protected while they work
- How changes to the job are handled
Prices and what affects them
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- Unusual colours or finishes
- The material
- Whether old repairs or coatings need taking off
- Doing more than one item at once
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send photos for a quote
When you take your pictures, a few simple things make all the difference:
- Good light, ideally daylight, without flash glare
- The material, if you know it
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Why repair rather than replace?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
What you get with us
- One visit for most repairs
- Fixed prices from your photos
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
See our pricing and resurfacing vs replacement cost guide.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Our work in Cwm
Cwm is about 3 miles south of Prestatyn, in Denbighshire. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. We cover 81 places in Denbighshire. Our jobs stretch from Cwm to Liverpool (about 21 miles away).
We cover every part of LL18 and the streets around it. We regularly work on streets such as Elwy Avenue, Ffordd-y-Cwm and Ffordd Ffynnon. Close by, we cover Ochr-y-foel (1 mile north), Pen-y-ffordd (2 miles west), Rhuddlan (2 miles west), St Asaph (3 miles south-west) and Nant-y-Patrick (4 miles south). Larger places within reach include Rhyl (4 miles north-west), Prestatyn (3 miles north), Denbigh (7 miles south), Ruthin (12 miles south), Kinmel Bay (5 miles west) and Fron (7 miles south).
Landmarks near Cwm
Locally, our jobs take us to homes close to The Blue Lion Inn, Ysgol Hiraddug and Ysgol Glan Clwyd. For rail, the closest station is Prestatyn station, roughly 3.5 miles north. Other landmarks nearby include H.M. Stanley Hospital (2.6 miles south-west) and St Asaph Cathedral Museum (2.5 miles south-west). For a walk, there is Rhuddlan Nature Reserve and Y Foel.
About our accreditations · Every repair comes with a one-year guarantee.
