Neath Port Talbot · Wales

Bath Repair for Cwrt-y-defaid homes

Bath repair in Cwrt-y-defaid without the cost of replacing. Send us photos for a fixed price, then we come to you.

  • Repairs from £95
  • Scratches you can feel with a fingernail
  • Damage beneath the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Cwrt-y-defaid

About our bath repair in Cwrt-y-defaid

A typical bath repair is a few hours’ work, and you can normally bathe again the following day. There’s no need to book a plumber or tiler, because nothing is disconnected. If you’re dealing with a kit repair that didn’t last and chips under the taps, we can usually put it right.

A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.

Location
Cwrt-y-defaid (SA13)
County
Neath Port Talbot
Warranty
12 months on all our work
Quote
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

FAQs for Cwrt-y-defaid

Is a bath repair durable?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

Is repairing better than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can you repair a failed DIY repair?

Yes. We remove the old filler and start again. Mention it when you send photos.

Can you quote from pictures?

Nearly always. We only ask to see it in person if the pictures cannot show what we need.

Do you come to Cwrt-y-defaid?

Yes. We work across the UK and travel to Cwrt-y-defaid. Send photos and we will quote, or call 0345 017 0787.

Which areas do you work in?

Everywhere in the UK, Cwrt-y-defaid included. There is no extra charge for travel.

Keeping it looking good

How the surface is treated afterwards matters:

  • Ensure an acrylic bath is firm underfoot
  • Don’t leave a fresh chip for long
  • Stick to mild cleaners and a soft cloth
  • Give the bath a quick rinse after use

Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.

Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.

Landlords, agents and businesses in Cwrt-y-defaid

We work for landlords, letting agents and housing providers in Cwrt-y-defaid as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

Prices and what affects them

Prices start from £95. Quotes are free and the price is fixed. What we look at:

  • Any earlier repairs that need removing first
  • How many items we do on one visit
  • What the surface is made of
  • How much damage there is

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Quotes from your pictures

Good photos mean an accurate price. Here’s what we find most useful:

  • Daylight if possible, and no flash reflection
  • A close-up of the damage, in focus
  • Any details about the material
  • Any earlier repairs or coatings

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Cracks in parts of an acrylic bath we can’t get to from below
  • Wear across the whole surface, which needs re-enamelling
  • Rust that has eaten right through a steel bath

Not sure? Send photos and we’ll give you a straight answer before booking.

What we work on

  • Cast iron enamel
  • Acrylic
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

What happens on the day

From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a few hours, depending on the damage, and we finish by cleaning up and talking you through the result.

  1. First, we check the damage against your pictures and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Keep children and pets away from the room on the day
  • Tell us about parking, stairs or access
  • Let us know which floor the room is on

Ask for a price

Send us a photo of the damage and one of the entire item, and tell us you’re in Cwrt-y-defaid, and we’ll come back with a fixed quote.

Get a free quote

Related advice

Cwrt-y-defaid and nearby

Cwrt-y-defaid is about 4 miles south-east of Port Talbot, in Neath Port Talbot. Wherever you are in the SA13 postcode area, we come to you. Cwrt-y-defaid is one of 100 places in Neath Port Talbot we cover.

Jobs in SA13 work the same way as everywhere else we cover. We also cover the places around Cwrt-y-defaid: Eglwys Nunydd (1 mile south), Margam (1 mile north), Brombil (1 mile north-west), Coedhirwaun (1 mile south-east) and Margam Moors (2 miles west). We also work in nearby towns such as Neath (8 miles north-west), Port Talbot (4 miles north-west), Sandfields (4 miles north-west), Mount Pleasant (8 miles north-west), Baglan Moors (5 miles north-west) and Sandfields West (5 miles north-west).

Landmarks near Cwrt-y-defaid

Locally, our jobs take us to homes close to Dyffryn School, Coed Hirwaun Primary School and St Mary's Abbey Church. For rail, the closest station is Pyle station, roughly 2.5 miles south-east. Other landmarks nearby include Neath Port Talbot Hospital (4.3 miles north-west) and Margam Stones Museum (0.6 miles north). The countryside around Cwrt-y-defaid includes Kenfig Burrows slack and Mynydd y Castell.

Map of Cwrt-y-defaid © OpenStreetMap contributors

Repair or replace in Cwrt-y-defaid?

A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Our bath repair starts from £95. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

Why us?

  • Every repair guaranteed for a year
  • A fixed quote before you book
  • CHAS, Constructionline and SafeContractor accredited
  • We leave the room as we found it

Take a look at our pricing and resurfacing vs replacement cost guide.

Different materials, different repairs

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.