North Ayrshire · Scotland
Bath chip & crack repair in Dalry, North Ayrshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Dalry, with a one-year guarantee on every repair.
- Repairs from £95
- Chips along the edge of the bath
- Impact holes in acrylic
Bath repair in Dalry without replacing anything
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Typical jobs include rusty patches near the plughole and a chip where the taps sit, across acrylic, cast iron enamel and pressed steel enamel.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Dalry (KA24)
- County
- North Ayrshire
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Common questions in Dalry
How much does bath repair cost in Dalry?
Repairs from £95. We give a fixed price from your pictures. Send a close-up and a picture of the whole item with your KA24 postcode.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How long before I can use the bath?
Generally the day after. We confirm the time before we leave.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
Can you fix rust around the plughole?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
Will the repair show?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Signs you need bath repair in Dalry
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Common reasons people in Dalry contact us include:
- Rust spots around the plughole
- Holes from dropped items
- Chips along the edge of the bath
- Cracks in an acrylic bath
Questions to ask before you book
- What prep work is covered
- Who will actually do the work
- Whether the colour is mixed to match
- How long the guarantee is and what it covers
Repair or replace in Dalry?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Our bath repair starts from £95. We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Dalry
- Nothing taken out or refitted
- Free fixed quotes from pictures
- One visit for most repairs
- Honest advice, even when it means no job
Read our pricing and resurfacing vs replacement cost guide.
What affects the price in Dalry
Prices start from £95. We price every job individually, from your pictures. The main factors are:
- Previous DIY repairs that have to come out
- Access to the area
- How many items we do on one visit
- The size and number of damaged areas
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- One picture of the whole bath
- Details of any past repairs
- Something in shot to show the size
- A close-up of the damage, in focus
The quickest way to a price is to send two or three photos using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
What we cannot put right
It helps to know what we can’t do:
- Wear across the entire surface, which needs re-enamelling
- Cracks in acrylic we cannot reach from underneath
- Metal that has corroded all the way through
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
About Dalry
Dalry is about 4 miles north of Kilwinning, in North Ayrshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Dalry is one of 53 places in North Ayrshire where we work. We work right across the region, from Dalry to Glasgow (20 miles away).
Postcode districts we cover here: KA24. You will find streets such as Main Street, Roche Way and Vennel Street, and we cover them all. If you’re just outside Dalry, we cover Drakemyre (1 mile north), Meikle Auchengree (3 miles north-east), Glengarnock (3 miles north-east), Longbar (3 miles north-east) and Kilbirnie (3 miles north-east). We also work in nearby towns such as Irvine (7 miles south-east), Saltcoats (5 miles south-west), Largs (8 miles north-west), Ardrossan (5 miles south-west), Stevenston (5 miles south) and West Kilbride (5 miles west).
What’s near Dalry
Our customers here include homes close to St Margaret's Church, The Auld Hoose Bar and Dalry, among other places. The closest station to Dalry is Dalry station, roughly 0.5 miles east. A little further out are Dalgarven Mill Museum of Country Life and Costume (2.2 miles south) and Monk Castle (1.2 miles south). Open spaces near Dalry include Stevenston Loch and Law Hill.
Towns and villages near Dalry
More services for Dalry
Landlord and trade work in Dalry
If you manage property in Dalry, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Keep abrasive pads and gritty cleaners away from the bath
- A dripping tap stains enamel, so fix it early
- Stick to mild cleaners and a soft cloth
- Cover the bath during DIY or decorating
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
What happens on the day
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours, depending on the damage. Before leaving, we tell you how long to leave it and how to look after it.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Ensure the room can be ventilated
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
Getting a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
