Cumbria · England
Bath Repair for Lindal in Furness homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Lindal in Furness and across Cumbria. Free, fixed quotes from your photos.
- Repairs from £95
- Rust spots around the plughole
- A kit repair that didn’t last
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Fix dripping taps early to stop staining and limescale
- Cover the bath during DIY or decorating
- Use a soft cloth and washing-up liquid for everyday cleaning
- Ensure an acrylic bath is firm underfoot
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Bath repair at your home in Lindal in Furness
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. We are frequently asked to fix cracks in an acrylic bath and chips along the edge of the bath, in roll-top & freestanding, acrylic and pressed steel enamel.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Lindal in Furness (LA12)
- County
- Cumbria
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Lindal in Furness questions
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
What about rust by the waste?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
When we would advise against a repair
To be straight with you, some problems need a different fix:
- A bath worn all over, where resurfacing makes more sense
- Cracks in parts of an acrylic bath we can’t get to from below
- Water coming from the waste or taps rather than the bath
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Common problems we fix in Lindal in Furness
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
These are the problems we are asked about most:
- A kit repair that didn’t last
- A hole punched through by something heavy
- Cracks in an acrylic bath
- Damage done while the bathroom was being fitted
Questions to ask before you book
- Whether they match the colour on site
- The length of the guarantee and what it covers
- Who will actually do the work
- What prep work is covered
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for a few hours, depending on the damage. Before we go, we will explain how long to leave it and how to look after it.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the following day.
Preparing for the visit
- Point us to the nearest place to park
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Read more
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Nearby places to Lindal in Furness
Also in Lindal in Furness
Covering Lindal in Furness
Lindal in Furness is about 3 miles south-west of Ulverston, in Cumbria. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Lindal in Furness is one of 438 places in Cumbria we cover. Our nearest city page is Liverpool, about 54 miles away.
Our technicians cover all of LA12. From London Road, Low Farm Close and The Green or a nearby road, a technician can come to you. Other places close to Lindal in Furness include Marton (1 mile north-west), Pennington (1 mile north-east), Great Urswick (1 mile south-east), Swarthmoor (1 mile north-east) and Little Urswick (2 miles south-east). Larger places within reach include Barrow-in-Furness (5 miles south-west), Ulverston (3 miles north-east), Hindpool (5 miles south-west), Salthouse (5 miles south-west), Risedale (5 miles south-west) and Vickerstown (6 miles south-west).
Near you in Lindal in Furness
Our clients here include homes close to Church of St Peter, Dowdales School and Lindal and Marton Primary School and the streets around them. Lindal in Furness’s nearest station is Dalton station, roughly 1.7 miles south-west of the centre. Other landmarks nearby include Laurel And Hardy Museum (2.7 miles north-east) and Dalton Castle (1.9 miles south-west). For a walk, there is Birkrigg Common and Urswick Tarn.
How we price bath repair
Repairs from £95. We charge the same across the UK, including Lindal in Furness. What changes the price is:
- Previous DIY repairs that have to come out
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
Upload a picture of the damage and a wider shot of the entire item, with your LA12 postcode, and we will come back with a fixed quote.
Landlord and trade work in Lindal in Furness
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
