Cumbria · England
Shower tray repair & resurfacing in Dalton-in-Furness, Cumbria
Shower tray chip, crack and scratch repairs and resurfacing for homeowners, landlords and businesses in Dalton-in-Furness. Send photos for a free, fixed quote.
- Repairs from £95
- Damage around the waste
- Snagging damage in a new bathroom
Should you replace it?
The tray is generally the last thing fitted and the first thing tiled up to, so taking one out disturbs a lot. Repairing it avoids that disruption. Our shower tray repair starts from £95. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before you book.
Why book with us
- Normally one visit, start to finish
- Rooms protected and left tidy
- A fixed quote before you book
- We come to you, anywhere in the UK
Take a look at our pricing.
Shower tray repair at your home in Dalton-in-Furness
Shower tray repairs are one of our most common jobs. Chipped edges, cracks and worn finishes are all things we fix in place. Our repair technicians work on stone resin, enamelled steel and acrylic, and the jobs we see most are chipped corners or rims and cracks running from the waste.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Dalton-in-Furness (LA15, LA13)
- Area hub
- Cumbria
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
We turn up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, or most of a day for a full resurface, and we leave the room as we found it.
- First we check the tray is solid and work out why any crack happened.
- The damaged area, or the entire tray, is cleaned and prepared.
- We fill and strengthen any chips or cracks and sand them smooth.
- We match the colour, or refinish the full tray.
- The tray is left to cure and can normally be used the day after.
How to prepare
- Move bottles, mats and clutter away from the area
- Open a window if you can
- Avoid using the area for a few hours before we arrive
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Read more
What we’re called out for in Dalton-in-Furness
Stone resin trays are rigid, so they crack rather than bend when they sit on an uneven or poorly supported floor. Timber floors that move can cause it too.
The things customers typically mention when they call are:
- A crack across the base
- A dull, stained or worn surface
- Damage around the waste
- Snagging damage in a new bathroom
What your quote should include
- How changes to the job are handled
- What protection goes down before work starts
- If travel is included in the price
- Whether a trained technician does the job
What your shower tray is made of matters
Enamelled steel
Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.
Stone resin
Stone resin trays are rigid and slim. They need a flat, solid base, and we match repairs to the surface finish.
Dalton-in-Furness questions
Is there a call-out fee?
We do not add a call-out fee. Your fixed price includes everything.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Can a stained tray be refinished?
Yes. The entire tray can be resurfaced.
How long does it take to cure?
Normally by the following day. We will tell you the exact time when we finish.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Our work in Dalton-in-Furness
Dalton-in-Furness is about 3 miles north-east of Barrow-in-Furness, in Cumbria. From the centre of Dalton-in-Furness to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 438 places in Cumbria. We work right across the region, from Dalton-in-Furness to Liverpool (about 53 miles away).
All of LA15 and LA13 is within our area. From Market Street, Station Road and Market Place or anywhere nearby, a technician can come to you. We also travel to Newton (1 mile south), Stainton with Adgarley (1 mile south-east), Lindal in Furness (2 miles north-east), Marton (2 miles north) and Little Urswick (2 miles east). Further out, we also cover Barrow-in-Furness (3 miles south-west), Ulverston (4 miles north-east), Hindpool (3 miles south-west), Salthouse (3 miles south-west), Risedale (3 miles south) and Vickerstown (5 miles south-west).
Near you in Dalton-in-Furness
Typical jobs here are in homes near Seventh Day Adventist Church With Attached Railings, Chappells Tavern and Chapel Street Infants and Nursery School. Dalton-in-Furness has its own railway station: Dalton station. Further afield, we also cover the area around Furness Abbey Museum (1.5 miles south-west) and Dalton Castle (less than half a mile west). Open spaces near Dalton-in-Furness include Birkrigg Common and North Walney.
When a repair isn’t the answer
A repair is not always the answer, and we will tell you before we start. We can’t fix:
- Movement caused by a poor base, until the support is fixed
- Damage below the tray that needs a builder
- Trays cracked in several places
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Cast iron
- Ceramic
- Stone resin
- Acrylic
- Enamelled steel
How we price shower tray repair
Repairs from £95. We price every job individually, from your pictures. What matters most is:
- How easy the damage is to reach
- What the surface is made of
- The type of damage
- Whether we combine several jobs
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Send pictures for a quote
You can usually get a fixed price without us visiting. To make it quick:
- The material, if you know it
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- One sharp close-up of the damage
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Places near Dalton-in-Furness
What else we do in Dalton-in-Furness
How to care for the repair
To keep it looking its best:
- Use the extractor fan
- Rinse away soap after showering
- Report any creaking or movement early
- Do not stand heavy bottles on the tray
Wait the full curing time before you shower. After that, gentle cleaning and good ventilation keep it in good shape.
Act on split sealant early. Water gets behind and under the tray and can damage the floor below.
About our accreditations · Every repair comes with a one-year guarantee.
