Bolton · England
Bath chip & crack repair in Deane, Bolton
Damaged bath in Deane? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- An old repair that has yellowed or come loose
- A chipped rim or side

Bath repair in Deane, done in place
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can usually use the bath the next day. Whether it’s chips caused by builders and hairline or through cracks in acrylic, we can typically put it right, whatever the material.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.

- Where
- Deane (BL3, BL1, BL6)
- Area hub
- Bolton
- Cover
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
What affects the price in Deane
Prices start from £95. A fixed quote means you know the cost before you book. We take into account:
- How many areas need work
- What the surface is made of
- Unusual colours or finishes
- The type of damage
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- A wider photo showing the entire bath
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
For a price in Deane, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Repairing versus replacing in Deane
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. A repair deals only with the damage in a single visit. Repairs from £95, with every job priced individually. Compared with replacing, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- One price list for the entire UK
- One-year guarantee on every repair
- Nothing taken out or refitted
- Technicians who travel to you, UK-wide
See our full price list or guide to resurfacing and replacement costs.
What a repair cannot fix
In fairness, there are a few things a repair won’t fix:
- Water coming from the waste or taps rather than the bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
About Deane
Deane is about 2 miles south-west of Bolton, in Bolton. Customers in Deane get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Deane is one of 61 towns and villages in Bolton we cover. Our jobs stretch from Deane to Manchester (12 miles away).
Our visits in BL3, BL1 and BL6 are booked in the same way as anywhere else. Whether you live on Wigan Road, Annis Road and Raven Road or anywhere nearby, a technician can come to you. We also cover the places around Deane: Rumworth (1 mile west), Heaton (1 mile north), Daubhill (1 mile south-east), Markland Hill (1 mile north) and Hunger Hill (1 mile south-west). Further out, we also cover Horwich (3 miles north-west), Farnworth (3 miles south-east), Westhoughton (3 miles south-west), Kearsley (4 miles south-east), Little Lever (4 miles east) and Moses Gate (3 miles south-east).
Landmarks near Deane
Typical jobs here are in homes near Bolton Library and Museum Services, St. Mary the Virgin and Kings Head Public House and the streets around them. Also close by are Moss Bank Park (1.7 miles north), Ladybridge Community Primary School (under half a mile west) and Ladybridge High School (under half a mile south-west). Deane’s nearest station is Lostock station, about 1.1 miles west. Nearby you will also find Bolton le Moors (1.7 miles east) and Bolton Steam Museum (1.1 miles north-east). Not far away are Nob End and Noon Hill.
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Give the bath a quick rinse after use
- A dripping tap stains enamel, so fix it early
- Avoid scourers, wire wool and gritty cream cleaners
- Do not leave a fresh chip for long
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
What happens on the day
The work is clean and fairly quiet. We protect the area first, then the job itself takes a few hours. At the end we talk you through the curing time and the aftercare.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, typically by the day after, the bath is ready to use.
How to prepare
- Keep children and pets away from the room on the day
- Let us know about parking or access
- Tell us about any previous repairs or coatings
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Related advice
Towns and villages near Deane
Other services in Deane
Landlords, agents and businesses in Deane
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Common questions in Deane
When can I have a bath again?
Most baths can be used the following day. We confirm the time before we leave.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
What areas do you cover?
We cover the whole UK, including Deane and the rest of Bolton. Send your postcode with your photos and we will confirm dates.
Do you come to Deane?
Yes. We work across the UK and come to Deane and the rest of Bolton. Send pictures and we will quote, or call 0345 017 0787.
Is a holed acrylic bath repairable?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including older coloured suites.
Common problems we fix in Deane
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
The things customers typically mention when they call are:
- Damage beneath the taps
- A chipped rim or side
- Hairline or through cracks in acrylic
- Scuffs and scratches in the surface
What to look for in a quote
- Is the price fixed, and does it include VAT?
- Who turns up on the day
- Aftercare advice
- What protection goes down before work starts
About our accreditations · Every repair comes with a one-year guarantee.

