Perth and Kinross · Scotland
Bath Repair for Rumbling Bridge homes
Local bath repair for Rumbling Bridge: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Chips caused by builders
- Impact holes in acrylic
What bath repair costs
Prices start from £95. Every quote is fixed and free. What we take into account:
- How many items we do on one visit
- Access to the area
- How many areas need work
- Any earlier repairs that need removing first
We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
You can generally get a fixed quote without us visiting. To help us price it:
- Your postcode, so we can check dates
- A wider photo showing the whole bath
- A coin beside the damage so we can judge size
- Any details about the material
Send us photos of the damage and a wider shot of the entire item, and tell us you’re in Rumbling Bridge, and we will come back with a fixed quote.
Bath repair in Rumbling Bridge without replacing anything
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. Common call-outs are for a kit repair that didn’t last and rust spots around the plughole, on acrylic, whirlpool & spa baths and cast iron enamel.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Rumbling Bridge (KY13)
- Region
- Perth and Kinross
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
Many people think a damaged bath means a new one. In most cases it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Our bath repair starts from £95. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why us?
- A year’s guarantee on all work
- Generally one visit, start to finish
- We will tell you if it’s not worth repairing
- Repair technicians who travel to you, UK-wide
Take a look at our pricing and guide to resurfacing and replacement costs.
Landlords, agents and businesses in Rumbling Bridge
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Questions from Rumbling Bridge
Can you fix rust around the plughole?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
How invisible is a bath repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Can you repair a hole in a bath?
Usually. Send us a picture of the hole and one from under the bath if you can.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
What we cannot put right
In fairness, some problems need a different fix:
- Water coming from the waste or taps rather than the bath
- Cracks in parts of an acrylic bath we cannot get to from below
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Send us photos and we will tell you honestly.
Materials we repair
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Keeping it looking good
Simple care helps the repair last. Our advice:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Store metal items away from the bath
- A dripping tap stains enamel, so fix it early
- Check that an acrylic bath does not move when you stand in it
A repaired bath needs no special treatment. Skip bleach and gritty creams and give it a rinse after each bath.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
How it works
We turn up at the time we agreed with you and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. Most visits take two to three hours for most chips, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Ensure the room can be ventilated
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
How to get a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Advice
Common problems we fix in Rumbling Bridge
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Customers generally contact us about:
- Scuffs and scratches in the surface
- Rust by the waste and overflow
- Chips on the rim or sides
- Chips under the taps
What to look for in a quote
- Whether the price covers travel
- How long the guarantee is and what it covers
- Whether cleaning and preparation are in the price
- What happens if they find more damage
Where we work around Rumbling Bridge
Rumbling Bridge is about 9 miles north-east of Alloa, in Perth and Kinross. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover 107 places across Perth and Kinross, from the larger towns to small villages. Our nearest city page is Edinburgh, about 22 miles away.
Every address in KY13 is within our area. Other places close to Rumbling Bridge include Crook of Devon (1 mile east), Pool of Muckhart (1 mile north-west), Powmill (1 mile south), Blairingone (3 miles south-west) and Carnbo (3 miles north-east). We also work in nearby towns such as Auchterarder (9 miles north-west), Kinross (6 miles east), Oakbank (15 miles north), Bridge of Earn (13 miles north-east), Milnathort (7 miles north-east) and Abernethy (15 miles north-east).
Near you in Rumbling Bridge
Locally, our jobs take us to homes close to St Serf's Church, among other places. A little further out are Castle Campbell (3.4 miles west). The countryside around Rumbling Bridge includes Innerdownie.
Nearby places to Rumbling Bridge
What else we do in Rumbling Bridge
About our accreditations · Every repair comes with a one-year guarantee.
