Cumbria · England
Bath Repair for Drigg homes
Our repair technicians come to Drigg for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- An old repair that has yellowed or come loose
- Rust by the waste and overflow
Bath repair at your home in Drigg
Most of our bath repairs take a few hours, and you can typically bathe again the next day. There is no need to book a plumber or tiler, because nothing is disconnected. If you’re dealing with a hole punched through by something heavy and cracks in an acrylic bath, we can generally put it right.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Area
- Drigg (CA19)
- Region
- Cumbria
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What bath repair costs
Prices start from £95. There’s no charge for travel to Drigg. The price comes down to:
- Unusual colours or finishes
- What kind of damage it is
- How many areas need work
- Access to the area
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what we need:
- One picture of the whole bath
- Any earlier repairs or coatings
- Any details about the material
- Something in shot to show the size
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
How it works
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes a morning or an afternoon for most jobs. We leave the room clean and you’ll know when it can be used.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the following day.
Before we arrive
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and you’re under no obligation.
Related advice
Drigg: your questions answered
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Is a holed acrylic bath repairable?
Normally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
What does bath repair cost?
Prices start from £95. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your CA19 postcode.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Will I be able to see the repair?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Keeping it looking good
To keep it looking its best:
- Keep metal cans and razors off the surface
- Use a soft cloth and washing-up liquid for everyday cleaning
- Have new chips seen to early
- Fix dripping taps early to stop staining and limescale
There is nothing special to do after a repair, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Honest limits
A repair is not always the answer, and we will tell you before we start. We can’t fix:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaking fittings, which need a plumber
- Metal that has corroded all the way through
If in doubt, send photos and we will say what we think before you book.
Materials we work on in Drigg
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
Repairs by material
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Drigg and nearby
Drigg is about 12 miles south-east of Whitehaven, in Cumbria. Whether you’re in the middle of Drigg or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Drigg is one of 438 places in Cumbria where we work. You can also see our page for Liverpool, about 70 miles away.
All of CA19 is within our area, from the main roads to the quietest streets. You’ll find streets such as Station Road and Old Shore Road, and we cover them all. We also cover the places around Drigg: Holmrook (1 mile east), Seascale (2 miles north-west), Ravenglass (2 miles south-east), Gosforth (3 miles north) and Santon (3 miles north-east). We also work in nearby towns such as Whitehaven (12 miles north-west), Cleator Moor (10 miles north), Millom (14 miles south-east), Bransty (13 miles north-west), Egremont (8 miles north-west) and Hensingham (12 miles north-west).
Landmarks near Drigg
Locally, our jobs take us to homes close to St Peter's Church and the streets around them. There’s a railway station in Drigg itself: Drigg station. Further afield, we also cover the area around Muncaster Castle (3 miles south-east). For a walk, there’s Bamse's Wood and Irton Pike.
Also near Drigg
More services for Drigg
Repair or replace in Drigg?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Prices start from £95. Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Drigg customers choose us
- No extra charge for your area
- Rooms protected and left tidy
- Repair technicians who travel to you, UK-wide
- Colour-matched on site
Take a look at our full price list and bath cost comparison.
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
For anyone letting property in or around Drigg, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
