Cumbria · England
Bath chip & crack repair in Wellington, Cumbria
Local bath repair for Wellington: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- A hole punched through by something heavy
- A chip where the taps sit
Wellington: your questions answered
Which areas do you work in?
Everywhere in the UK, Wellington included. Travel is included in the price.
When can I have a bath again?
Normally the day after. We’ll tell you the exact curing time when we finish.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Can you fix rust around the plughole?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
What happens once I’ve sent pictures?
We come back with a fixed price, normally with dates to choose from. You are under no obligation.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Bath repair in Wellington without replacing anything
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Typical jobs include snagging damage from a refit and a chip where the taps sit, on cast iron enamel, acrylic and pressed steel enamel.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Wellington (CA20)
- Area hub
- Cumbria
- Warranty
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Wellington
Other services in Wellington
Honest limits
A repair isn’t right for every job, including:
- Wear across the whole surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we cannot get to from below
- A steel bath rusted through
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Pressed steel enamel
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
Why choose Surface Doctor in Wellington
- Straight answers about what a repair can do
- Colours mixed by hand to suit your surface
- Work done at your home or business
- Dust sheets down, tidy finish
See our full price list and bath cost comparison.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Clean with warm water and a mild detergent
- Keep abrasive pads and gritty cleaners away from the bath
- Rinse the bath after use, especially in hard water areas
- Cover the bath during DIY or decorating
There is nothing special to do after a repair. Skip bleach and gritty creams and give it a rinse after each bath.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Wellington and nearby
Wellington is about 10 miles south-east of Whitehaven, in Cumbria. Whether you are in the middle of Wellington or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Wellington is one of 438 towns and villages in Cumbria we cover. We work right across the region, from Wellington to Liverpool (about 73 miles away).
Postcode districts we cover here: CA20. Local streets include Leagate Brow and Walkmill Gardens, all of which we cover. Close by, we cover Gosforth (1 mile south-west), Santon (2 miles south-east), Calder Bridge (3 miles north-west), Seascale (3 miles south-west) and Holmrook (3 miles south). We also work in nearby towns such as Whitehaven (10 miles north-west), Moorclose (15 miles north), Cleator Moor (8 miles north-west), Bransty (11 miles north-west), Egremont (6 miles north-west) and Hensingham (10 miles north-west).
Around Wellington
Locally, our jobs take us to homes close to St Mary's Church and Gosforth CofE School and the streets around them. Wellington’s nearest station is Seascale station, about 3.2 miles south-west. Well-known places in the area include Abbey Flatts (2.8 miles north-west). Green spaces nearby include Bamse's Wood and Ponsonby Fell.
What happens on the day
The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the work takes a few hours. At the end we talk you through how soon it can be used and how to look after it.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Ensure the area is dry
- Point us to the nearest place to park
- Clear the area around the damage
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
What affects the price in Wellington
Prices start from £95. A fixed quote means you know the cost before you book. We look at:
- What the surface is made of
- Where the damage is and how we get to it
- How many items we do on one visit
- How many areas need work
The price reflects the work involved, not your postcode. You’ll see the full price before you book, with nothing added on the day.
How to get a fixed quote
It only takes a minute to photograph the damage. Try to send:
- Your postcode, so we can check dates
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Signs you need bath repair in Wellington
A cracked acrylic bath normally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until it cracks.
The things clients typically mention when they call include:
- Scuffs and scratches in the surface
- Chips along the edge of the bath
- Holes from dropped items
- Hairline or through cracks in acrylic
Comparing quotes
- What the guarantee covers, and for how long
- What prep work is covered
- What happens if they find more damage
- Is the price fixed, and does it include VAT?
About our accreditations · Every repair comes with a one-year guarantee.
