Cumbria · England
Bath chip & crack repair in Holmrook, Cumbria
Bath repair across Holmrook and nearby, done in a single visit in most cases.
- Repairs from £95
- Impact holes in acrylic
- Chips along the edge of the bath
About our bath repair in Holmrook
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. We’re frequently asked to fix hairline or through cracks in acrylic and impact holes in acrylic, in acrylic, pressed steel enamel and roll-top & freestanding.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Where
- Holmrook (CA19)
- Area hub
- Cumbria
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath repair in Holmrook
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
What happens once I’ve sent photos?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
How do I book?
Send pictures through the quote form or call 0345 017 0787, and we will take it from there.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
How we price bath repair
Repairs from £95. You will know the full cost before you book. We look at:
- What the surface is made of
- Whether we combine several jobs
- Where the damage is and how we get to it
- How many areas need work
A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from pictures
Most quotes are done from pictures alone. To make it quick:
- Your postcode, so we can check dates
- A picture taken from further back
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and you are under no obligation.
Repair or replace in Holmrook?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. Our prices are the same across the UK, with no extra for Holmrook. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- No need to remove anything
- One-year guarantee on every repair
- We leave the room as we found it
- Free fixed quotes from pictures
Take a look at our pricing and resurfacing vs replacement cost guide.
Our work in Holmrook
Holmrook is about 13 miles south-east of Whitehaven, in Cumbria. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Our repair technicians cover 438 places across Cumbria. Our jobs stretch from Holmrook to Liverpool (70 miles away).
Jobs in CA19 work the same way as everywhere else we cover. We also cover the places around Holmrook: Drigg (1 mile west), Ravenglass (2 miles south), Santon (2 miles north-east), Seascale (2 miles north-west) and Gosforth (3 miles north). Further out, we also cover Whitehaven (13 miles north-west), Cleator Moor (10 miles north), Millom (13 miles south-east), Bransty (13 miles north-west), Egremont (8 miles north-west) and Hensingham (12 miles north-west).
Landmarks near Holmrook
We visit homes around St Peter's Church, among other places. For rail, the closest station is Drigg station, roughly 0.9 miles south-west of the centre. Further afield, we also cover the area around Muncaster Castle (2.6 miles south-east). The countryside around Holmrook includes Muncaster Tarn and Bamse's Wood.
Do you need bath repair in Holmrook?
A cracked acrylic bath normally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex.
It’s worth getting a quote if you see:
- A failed DIY repair that is discoloured or lifting
- Deep scratches in acrylic
- Damage done while the bathroom was being fitted
- A chip where the taps sit
Before booking anyone
- How long the guarantee is and what it covers
- How the colour is matched
- A fixed quote, and whether VAT is included
- How the room is protected while they work
Landlord and trade work in Holmrook
We work for landlords, letting agents and housing providers in Holmrook as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Places near Holmrook
More services for Holmrook
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a few hours. If anything looks different from your photos, we will talk to you before going ahead.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Read more
Looking after it afterwards
It’s all simple stuff:
- Make sure an acrylic bath is firm underfoot
- Don’t leave a fresh chip for long
- Keep abrasive pads and gritty cleaners away from the bath
- A dripping tap stains enamel, so fix it early
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
