North Tyneside · England
Bath Repair in Earsdon
Local bath repair for Earsdon: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Damage beneath the taps
- Chips on the rim or sides
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Check that an acrylic bath does not move when you stand in it
- A dripping tap stains enamel, so fix it early
- Protect the bath with a towel when doing jobs nearby
- Don’t scrub with anything abrasive
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
Bath repair at your home in Earsdon
A typical bath repair is a few hours’ work, and the bath is back in use the next day. There’s no need to book a plumber or tiler, because the bath doesn’t move. Typical jobs include rust spots around the plughole and snagging damage from a refit, in roll-top & freestanding, cast iron enamel and acrylic.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Earsdon (NE25)
- Area hub
- North Tyneside
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath repair in Earsdon
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal will start to rust.
These are the problems we are asked about most:
- Snagging damage from a refit
- Chips on the rim or sides
- An old repair that has yellowed or come loose
- Holes from dropped items
What to look for in a quote
- When it can be used again
- How to look after the finish
- What happens if they find more damage
- Who will actually do the work
Other services in Earsdon
Landlords, agents and businesses in Earsdon
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Landlords, letting agents and housing providers in Earsdon use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Covering Earsdon
Earsdon is about 1 mile west of Whitley Bay, in North Tyneside. We travel to homes and businesses in Earsdon and the surrounding area, so nothing has to leave your home. Our technicians cover all 30 towns and villages in North Tyneside, from the larger towns to small villages. Our jobs stretch from Earsdon to Newcastle upon Tyne (about 7 miles away).
Jobs in NE25 are booked in the same way as anywhere else. From Garden Terrace, Woodlands Close and John Street or a nearby road, we can come to you. Close by, we cover Murton (1 mile south-east), Whitley Bay (1 mile east), New York (1 mile south), Hartley (2 miles north-east) and Seaton (3 miles north). Larger places within reach include Wallsend (3 miles south), North Shields (3 miles south-east), Longbenton (3 miles south-west), Cullercoats (3 miles east), Killingworth (3 miles west) and Chirton (3 miles south-east).
What’s near Earsdon
Locally, our jobs take us to homes close to Whitley Bay High School, Wellfield Middle School and Beehive Public House and the streets around them. Nearby too are Church of St Alban (under half a mile north-west) and South Wellfield First School (0.5 miles south-east). The nearest railway station is Northumberland Park (Tyne and Wear) station, about 1.2 miles south-west. A little further out are Tynemouth Castle and Priory (3.7 miles south-east) and Silverlink Shopping Park (2.3 miles south).
- Parks and local facilities nearby include Municipal Borough of Whitley Bay (2 miles east)
When a repair is not the answer
We won’t take on work that will not last, so here’s what a repair can’t put right:
- Rust that has eaten right through a steel bath
- Cracks in parts of an acrylic bath we cannot get to from below
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
The process
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes two to three hours for most chips, and the room is left clean and tidy.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can normally use the bath the following day.
Before we arrive
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
- Open a window if you can
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Your questions about bath repair in Earsdon
Can I get a quote without a visit?
Nearly always. If pictures don’t show enough, we will ask for another angle.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Do you come to Earsdon?
We do. We send a technician to Earsdon for every job, and the price is the same as everywhere else.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
How much does bath repair cost in Earsdon?
Prices start from £95. We give a fixed price based on pictures of the damage. Send a close-up and a picture of the entire item with your NE25 postcode.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Why repair rather than replace?
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. A repair fixes just the damaged area in one visit. Our bath repair starts from £95. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why choose Surface Doctor in Earsdon
- Work done at your home or business
- Straight answers about what a repair can do
- We leave the room as we found it
- A fixed quote before you book
See our pricing and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
