North Tyneside · England

Bath chip & crack repair in Longbenton, North Tyneside

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Longbenton, with a one-year guarantee on every repair.

  • Repairs from £95
  • Scratches you can feel with a fingernail
  • An old repair that has yellowed or come loose
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Longbenton

Bath repair at your home in Longbenton

We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can generally use the bath the following day. Common call-outs are for scuffs and scratches in the surface and impact holes in acrylic, across roll-top & freestanding, pressed steel enamel and whirlpool & spa baths.

All our work is covered by a one-year guarantee.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Area
Longbenton (NE12, NE27, NE7, NE3)
Region
North Tyneside
Guarantee
A year, on every repair
Quotes
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026

What a repair cannot fix

We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:

  • Leaking fittings, which need a plumber
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Cracks in acrylic we cannot reach from underneath

Send us photos and we will tell you honestly.

Materials we work on in Longbenton

  • Roll-top & freestanding
  • Cast iron enamel
  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths

How to look after the repair

Much of the damage we repair could have been avoided. A few tips:

  • Keep metal cans and razors off the surface
  • Fix dripping taps early to stop staining and limescale
  • Avoid scourers, wire wool and gritty cream cleaners
  • Rinse the bath after use, especially in hard water areas

Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.

Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Take it off before we arrive.

Our work in Longbenton

Longbenton is about 3 miles north-east of Newcastle upon Tyne, in North Tyneside. Jobs in Longbenton are booked in like any other job: a fixed price from your photos, then a visit to do the work. Our technicians cover all 30 towns and villages across North Tyneside.

Every address in NE12, NE27, NE7 and NE3 is covered, from the main roads to the quietest streets. We regularly work on streets such as Station Road North, Station Road and Cherwell Square. With the A189 and A191 close by, Longbenton is easy for our repair technicians to reach. Close by, we cover West Moor (1 mile west), Benton (1 mile south-west), Northumberland Park (1 mile north), Killingworth Village (1 mile north) and Little Benton (1 mile south). Larger places within reach include Tynemouth (5 miles east), Whitley Bay (4 miles east), North Shields (5 miles east), Cullercoats (5 miles east), Chirton (4 miles east) and Preston (5 miles east). As one of the bigger places in North Tyneside, Longbenton sees plenty of our work.

Landmarks near Longbenton

In Longbenton, that means homes near Gosforth Park, St Mary's Catholic Comprehensive School and Longbenton Community College. Nearby too are St Bartholomew's Church (under half a mile south) and Benton Dene Primary School (under half a mile south-west). The nearest railway station is Northumberland Park (Tyne and Wear) station, about 2.1 miles north-east. Nearby you’ll also find Newcastle upon Tyne Castle (3.9 miles south-west) and Freeman Hospital (1.6 miles south-west). Open spaces near Longbenton include Bent Hill and Havannah Nature Reserve.

  • Other local spots include Longbenton Urban District (under half a mile south)
Map of Longbenton © OpenStreetMap contributors

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Materials and what they mean for the repair

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

Should you replace it?

A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.

Why Longbenton customers choose us

  • We leave the room as we found it
  • No need to remove anything
  • We will tell you if it’s not worth repairing
  • Fixed prices from your pictures

Take a look at our prices page and guide to resurfacing and replacement costs.

Common problems we fix in Longbenton

The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.

Common reasons people in Longbenton contact us are:

  • Damage beneath the taps
  • Deep scratches in acrylic
  • A cracked acrylic bath
  • Chips caused by builders

Comparing quotes

  • Whether the colour is mixed to match
  • How soon you can use it again
  • Whether the price is fixed and includes VAT
  • How changes to the job are handled

Our hiring checklist

FAQs for Longbenton

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

How quickly can you book me in?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

Which areas do you work in?

The whole UK, including all of North Tyneside. Send your postcode with your photos and we’ll confirm dates.

Is a cracked acrylic bath repairable?

In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.

Is my repair covered?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

When can I have a bath again?

Usually within a day, depending on the repair.

Can you quote from photos?

In nearly every case. We only ask to see it in person if the photos can’t show what we need.

What bath repair costs

Prices start from £95. There’s no charge for travel to Longbenton. The price comes down to:

  • Doing more than one item at once
  • What kind of damage it is
  • How many areas need work
  • How easy the damage is to reach

We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Send pictures for a quote

When you take your pictures, these tips help us give you a firm price:

  • One sharp close-up of the damage
  • Details of any past repairs
  • Good light, ideally daylight, without flash glare
  • One picture of the entire bath

Most clients in Longbenton get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

What we do, step by step

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, usually the day after.

Preparing for the visit

  • Have a window or extractor fan available
  • Clear the area around the damage
  • Keep pets and children out of the room while we work

Ask for a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Get a fixed price

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.