Rhondda Cynon Taff · Wales
Bath Repair in Edmondstown
Bath repair for Edmondstown, without a refit. Send us photos for a fixed quote, then book a visit.
- Repairs from £95
- Rusty patches near the plughole
- Damage beneath the taps

Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
About our bath repair in Edmondstown
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Whether it’s chips on the rim or sides and a cracked acrylic bath, we can generally put it right, whatever the material.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.

- Where
- Edmondstown (CF40, CF39)
- County
- Rhondda Cynon Taff
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Edmondstown
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.
Typical reasons for a call-out include:
- A failed DIY repair that’s discoloured or lifting
- A chipped rim or side
- Scratches you can feel with a fingernail
- Chips under the taps
What to look for in a quote
- What protection goes down before work starts
- Whether they match the colour on site
- The length of the guarantee and what it covers
- Whether the price covers travel
What a repair can’t fix
Some jobs aren’t right for a repair, for example:
- A steel bath rusted through
- Leaking fittings, which need a plumber
- Cracks in parts of an acrylic bath we cannot get to from below
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
Landlord and trade work in Edmondstown
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
What bath repair costs
Prices start from £95. Prices are worked out job by job. What matters most is:
- What the surface is made of
- Doing more than one item at once
- The type of damage
- How hard the colour is to match
A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Quotes from your photos
Phone photos are fine, there’s no need for anything special. Just make sure we can see:
- The material, if you know it
- A coin or ruler next to the damage for scale
- One picture of the entire bath
- Where you are, by postcode
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Covering Edmondstown
Edmondstown is about 1 mile south-east of Tonypandy, in Rhondda Cynon Taff. Wherever you are in the CF40 postcode area, a technician comes to you. Edmondstown is one of 133 towns and villages in Rhondda Cynon Taff we cover.
Our visits in CF40 and CF39 are booked in the same way as anywhere else. Jobs here include addresses on Church Road, Oakdale Road and Ashdale Road and the roads around them. Close by, we cover Penrhiwfer (1 mile west), Williamstown (1 mile north-west), Trebanog (1 mile east), Penygraig (1 mile north-west) and Tonypandy (1 mile north-west). We also work in nearby towns such as Aberdare (8 miles north), Pontypridd (4 miles east), Mountain Ash (6 miles north-east), Rhondda (4 miles north-west), Church Village (6 miles south-east) and Mountain Ash East (6 miles north-east).
What’s near Edmondstown
Our clients here include homes close to Ysgol Gyfun Cwm Rhondda, Church of St John and Ysgol Gyfun Cwm Rhondda. Also close by are Williamstown Primary School (less than half a mile west) and Black Diamond Hotel (within half a mile south-east). Edmondstown’s nearest station is Dinas Rhondda station, roughly 0.9 miles north. A little further out are Rhondda (2.5 miles north-west) and Llantrisant Castle (5 miles south-east). The countryside around Edmondstown includes Mynydd Dinas and Ferndale Lake.
FAQs for Edmondstown
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
How invisible is a bath repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
When can I have a bath again?
Typically within a day, though it depends on what we have done.
Do you charge for travel?
We do not add a call-out fee. Your fixed quote includes everything.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Do you cover Edmondstown?
Yes. We cover the whole UK and come to Edmondstown. Send us photos for a fixed quote, or call 0345 017 0787.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Places near Edmondstown
Other services in Edmondstown
How the visit works
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. Most jobs take a few hours, depending on the damage, and you can get on with other things while we’re there.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Getting ready for the visit
- Point us to the nearest place to park
- Plan for the room to be out of bounds to pets and children
- Mention any earlier repairs or resurfacing
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Advice
Repairing versus replacing in Edmondstown
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- Honest advice, even when it means no job
- We come to you, anywhere in the UK
- Nothing taken out or refitted
- Free fixed quotes from pictures
Take a look at our prices page or guide to resurfacing and replacement costs.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.

