Rhondda Cynon Taff · Wales

Bath chip & crack repair in Penygraig, Rhondda Cynon Taff

Bath repair for Penygraig, without a refit. Get a fixed quote from your photos, then we come to you.

  • Repairs from £95
  • Deep scratches in acrylic
  • Chips along the edge of the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Penygraig

Bath repair in Penygraig, done in place

You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. Typical jobs include a chip where the taps sit and impact holes in acrylic, across roll-top & freestanding, cast iron enamel and pressed steel enamel.

Whatever the size of the job, it’s backed by a one-year guarantee in Penygraig and across Rhondda Cynon Taff.

Location
Penygraig (CF40)
County
Rhondda Cynon Taff
Warranty
A year, on every repair
Quote
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Last updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Penygraig questions

Do you cover Penygraig?

We do. Repair technicians travel to Penygraig from across the region, and the price is the same as everywhere else.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Will the repair show?

On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.

Is a bath repair permanent?

A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.

Is a holed acrylic bath repairable?

Normally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.

Do the materials smell?

There may be a mild smell during the work.

Is it worth repairing rather than replacing?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Where we work around Penygraig

Penygraig is about 5 miles west of Pontypridd, in Rhondda Cynon Taff. Jobs in Penygraig are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Penygraig is one of 133 places in Rhondda Cynon Taff where we work.

Our visits in CF40 work the same way as everywhere else we cover. We regularly work on streets such as Wern Road, Park Road and Gelli Road. Being close to the A4058 and A4119, Penygraig is easy for our technicians to reach. Neighbouring places we cover include Tonypandy (1 mile north-east), Williamstown (1 mile south-east), Trealaw (1 mile north), Penrhiwfer (1 mile south-east) and Dinas Rhondda (1 mile north-east). Within a short drive, we also cover Aberdare (7 miles north), Pontypridd (5 miles east), Mountain Ash (6 miles north-east), Rhondda (3 miles north-west), Church Village (7 miles south-east) and Mountain Ash East (6 miles north-east).

Around Penygraig

Locally, our jobs take us to homes close to Ysgol Gyfun Cwm Rhondda, St Gabriel & Raphael RC Primary School and Hermon Welsh Calvinistic Methodist Chapel, among other places. The closest station to Penygraig is Tonypandy station, about 0.5 miles north. Well-known places in the area include Rhondda (1.5 miles north-west) and Llwynypia Hospital (1.5 miles north). Green spaces nearby include Mynydd Pen-y-graig and Ferndale Lake.

Map of Penygraig © OpenStreetMap contributors

Landlords, agents and businesses in Penygraig

We regularly work with letting and managing agents. Just send photos, the address and how to get access.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

What we are called out for in Penygraig

Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal will start to rust.

Contact us if you’ve noticed any of these:

  • Chips under the taps
  • A failed DIY repair that is discoloured or lifting
  • Chips on the rim or sides
  • A hole punched through by something heavy

Comparing quotes

  • Whether the price is fixed and includes VAT
  • Whether they match the colour on site
  • When it can be used again
  • Who turns up on the day

10 questions to ask before you book

The process

It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a few hours, depending on the damage. If we find something your photos didn’t show, we will explain it before carrying on.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, typically the day after.

Before we arrive

  • Keep pets and children out of the room while we work
  • Clear the area around the damage
  • Mention if the room is upstairs or in a flat

How to get a price

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you’re under no obligation.

Get a fixed price

Read more

Materials and what they mean for the repair

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

What bath repair costs

Repairs from £95. We give every job a fixed price from photos. This is what makes a difference:

  • What the surface is made of
  • Where the damage is and how we get to it
  • Whether it’s a chip, crack, burn or wear
  • How hard the colour is to match

We charge the same wherever you are, so there is no premium for Penygraig. The job itself decides the price: how much damage, what it’s made of and how many items.

Send pictures for a quote

You can take the pictures on your phone. Just make sure we can see:

  • A coin beside the damage so we can judge size
  • Whether it’s been repaired or coated before
  • One picture of the entire bath
  • The material, if you know it

To get a price, send a couple of photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Repair or replace in Penygraig?

Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.

Why choose Surface Doctor in Penygraig

  • Everything repaired in place
  • A year’s guarantee on all work
  • Rooms protected and left tidy
  • Colour mixed on the day to match

Take a look at our full price list or bath cost comparison.

Looking after it afterwards

It’s all simple stuff:

  • Don’t leave a fresh chip for long
  • Clean with warm water and a mild detergent
  • Protect the bath with a towel when doing jobs nearby
  • Keep abrasive pads and gritty cleaners away from the bath

In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.

Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.