Kent · England
Bath chip & crack repair in Elvington, Kent
Bath repair across Elvington and nearby, usually in one visit and guaranteed for a year.
- Repairs from £95
- Scratches you can feel with a fingernail
- A kit repair that didn’t last
Should you replace it?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why us?
- One-year guarantee on every repair
- No extra charge for your area
- Straight answers about what a repair can do
- Rooms protected and left tidy
Take a look at our prices page and guide to resurfacing and replacement costs.
About our bath repair in Elvington
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the day after. If you’re dealing with damage beneath the taps and a hole punched through by something heavy, we can typically put it right.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Location
- Elvington (CT15)
- Area hub
- Kent
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
What affects the price in Elvington
Prices start from £95. We charge the same across the UK, including Elvington. The price reflects:
- The size and number of damaged areas
- What the surface is made of
- How easy the damage is to reach
- Doing more than one item at once
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed quote
You can take the pictures on your phone. Make sure they show:
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- A clear, close picture of the problem area
- Where you are, by postcode
Email us a picture of the damage and one of the whole item, and tell us you’re in Elvington, and we’ll reply with a fixed price.
Nearby places to Elvington
Also in Elvington
Landlord and trade work in Elvington
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For anyone letting property in or around Elvington, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Your questions about bath repair in Elvington
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
What happens after I send photos?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we will ask.
When can I have a bath again?
Normally by the following day, though it depends on what we’ve done.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
I tried a repair kit. Can you fix it?
Regularly. We strip it out, deal with any rust and repair it again.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is a cracked acrylic bath repairable?
Normally, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Is a bath repair permanent?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
What we are called out for in Elvington
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.
Most people get in touch when they notice something like this:
- An old repair that has yellowed or come loose
- A chip where the taps sit
- Cracks in an acrylic bath
- Rusty patches near the plughole
What your quote should include
- A fixed price, and whether VAT is included
- Who turns up on the day
- Whether cleaning and preparation are in the price
- How the colour is matched
What we do, step by step
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We tidy up before we leave and let you know when you can use it again.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Getting ready for the visit
- Point us to the nearest place to park
- Let us know which floor the room is on
- Tell us about parking, stairs or access
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Read more
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath worn all over, where resurfacing makes more sense
- Cracks in parts of an acrylic bath we cannot get to from below
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Give the bath a quick rinse after use
- Do not leave a fresh chip for long
- If an acrylic bath flexes, have its feet adjusted
- Don’t leave razors or cans standing in the bath
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
Our work in Elvington
Elvington is about 5 miles north of Dover, in Kent. Our repair technicians come to clients in Elvington and the surrounding area, so you do not need to take anything anywhere. We work in 922 places across Kent, from the larger towns to small villages. You can also see our page for London, about 62 miles away.
We work across CT15 and the streets around it. Streets in the area include Sweetbriar Lane, Poplar Drive and Fairview Road, and we cover them all. We also travel to Barfrestone (1 mile west), Frogham (1 mile west), Tilmanstone (2 miles east), Nonington (2 miles north-west) and Chillenden (2 miles north). Further out, we also cover Canterbury (9 miles north-west), Margate (13 miles north-east), Dover (5 miles south), Folkestone (9 miles south-west), Ramsgate (11 miles north-east) and Broadstairs (13 miles north-east).
Local landmarks in Elvington
Locally, our jobs take us to homes close to Church of St Peter and St Paul, The White Horse pub and Eythorne Elvington Community Primary School and the streets around them. The nearest railway station is Shepherds Well station, roughly 1.9 miles south-west. Further afield, we also cover the area around Buckland Hospital (5.5 miles south).
About our accreditations · Every repair comes with a one-year guarantee.
