Shropshire · England
Bath Repair for Eyton homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Eyton and across Shropshire. Send photos for a free, fixed quote.
- Repairs from £95
- Scratches you can feel with a fingernail
- Damage beneath the taps
About our bath repair in Eyton
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. If you are dealing with rust spots around the plughole and a hole punched through by something heavy, we can help, whatever the material.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Eyton (SY4)
- County
- Shropshire
- Warranty
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Our work in Eyton
Eyton is about 7 miles north-west of Shrewsbury, in Shropshire. We travel to clients in Eyton and the surrounding area, so you don’t need to take anything anywhere. Our repair technicians cover all 433 towns and villages in Shropshire. You can also see our page for Liverpool, about 42 miles away.
Every address in SY4 is within our area, from the main roads to the quietest streets. Other places close to Eyton include Baschurch (1 mile south-west), Grafton (2 miles south), Little Ness (3 miles south-west), Ruyton-XI-Towns (3 miles west) and Forton Heath (3 miles south). We also work in nearby towns such as Shrewsbury (7 miles south-east), Oswestry (10 miles north-west), Coleham (8 miles south-east), Kingsland (7 miles south-east), Whitchurch (13 miles north-east) and Belle Vue (8 miles south-east).
Near you in Eyton
Our clients here include homes close to The Corbet School, Church of All Saints and The Corbet School and the streets around them. The closest station to Eyton is Yorton station, roughly 4.2 miles east of the centre. Other landmarks nearby include Myddle Castle (2 miles east). Open spaces near Eyton include Crose Mere.
How the visit works
We work cleanly and quietly. We protect the area first, then the work takes a few hours, depending on the damage. Before we leave, we explain the curing time and the aftercare.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Tell us about parking, stairs or access
- Let the surface dry out before the visit
Getting a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
Towns and villages near Eyton
Other services in Eyton
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A steel bath rusted through
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Cracks in parts of an acrylic bath we cannot get to from below
Send us photos and we’ll tell you honestly.
Materials we repair
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
Eyton: your questions answered
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Is a holed acrylic bath repairable?
Frequently, if there’s access underneath. The hole is backed, filled and refinished to match.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
What does bath repair cost?
Prices start from £95. We give a fixed price from your photos. Send a close-up and a photo of the entire item and your postcode.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Keeping it looking good
Aftercare is simple:
- Do not scrub with anything abrasive
- Get a dripping tap fixed promptly
- Put a towel in the bath if you are working above it
- Stick to mild cleaners and a soft cloth
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Repair or replace: which is better?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. A repair keeps it in place. Our bath repair starts from £95. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Why Eyton clients choose us
- Everything repaired in place
- No extra charge for your area
- Colour mixed on the day to match
- We’ll tell you if it’s not worth repairing
Read our prices page or resurfacing vs replacement cost guide.
Prices and what affects them
Repairs from £95. You will know the full cost before you book. We look at:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- Any earlier repairs that need removing first
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- Something in shot to show the size
- A wider photo showing the entire bath
- Any earlier repairs or coatings
- Your postcode, so we can check dates
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Common problems we fix in Eyton
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal will start to rust.
Most people contact us after spotting something like this:
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
- Scratches you can feel with a fingernail
- Cracks in an acrylic bath
Comparing quotes
- What the guarantee covers, and for how long
- How your room will be protected
- Whether there are any call-out or travel charges
- Whether they match the colour on site
About our accreditations · Every repair comes with a one-year guarantee.
