Perth and Kinross · Scotland

Bath Repair for Kinloch Rannoch homes

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Kinloch Rannoch and across Perth and Kinross. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Cracks in an acrylic bath
  • A chip where the taps sit
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Kinloch Rannoch

Bath repair in Kinloch Rannoch without replacing anything

Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. Typical jobs include damage done while the bathroom was being fitted and rust spots around the plughole, in acrylic, roll-top & freestanding and whirlpool & spa baths.

You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Location
Kinloch Rannoch (PH16)
County
Perth and Kinross
Cover
12 months on all our work
Quote
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Common problems we fix in Kinloch Rannoch

Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.

Contact us if you’ve noticed any of these:

  • Cracks in an acrylic bath
  • Damage done while the bathroom was being fitted
  • A chip where the taps sit
  • A failed DIY repair that is discoloured or lifting

What your quote should include

  • Whether the colour is mixed to match
  • How long the guarantee is and what it covers
  • A fixed price, and whether VAT is included
  • When it can be used again

Our hiring checklist

What happens on the day

On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. Most visits take a morning or an afternoon, tidy-up included.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, typically the day after.

Getting ready for the visit

  • Have a window or extractor fan available
  • Tell us about parking, stairs or access
  • Keep a parking space free if you can

Get a quote

The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.

Get a fixed price

Advice

When a repair isn’t the answer

We will not take on work that won’t last, so here’s what a repair cannot put right:

  • Metal that has corroded all the way through
  • Cracks in parts of an acrylic bath we cannot get to from below
  • Leaking fittings, which need a plumber

If in doubt, send pictures and we will say what we think before you book.

Materials we work on in Kinloch Rannoch

  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic

Kinloch Rannoch and nearby

Kinloch Rannoch is about 33 miles west of Blairgowrie and Rattray, in Perth and Kinross. Across the PH16 area, we carry out the work at your property. Kinloch Rannoch is one of 107 towns and villages in Perth and Kinross we cover. We work right across the region, from Kinloch Rannoch to Glasgow (about 59 miles away).

Jobs in PH16 are booked in the same way as anywhere else. Local streets include Riverbank Crescent, Allt Mor Crescent and Allt Mor Place. Neighbouring places we cover include Trinafour (5 miles north-east), Boreland (9 miles south-east), Fearnan (9 miles south-east), Old Struan (10 miles north-east) and Kenmore (11 miles south-east).

Around Kinloch Rannoch

Locally, our jobs take us to homes close to The Old Church Of Rannoch. Green spaces nearby include Dunalastair Water.

Map of Kinloch Rannoch © OpenStreetMap contributors

What affects the price in Kinloch Rannoch

Prices start from £95. There are no hourly rates or hidden extras. The price depends on:

  • What the surface is made of
  • The colour and finish to match
  • Whether it’s a chip, crack, burn or wear
  • How easy the damage is to reach

We charge the same wherever you are, with no extra for Kinloch Rannoch. What changes the price is the job itself: how much damage, what it’s made of and how many items.

How to get a fixed quote

Good pictures mean an accurate price. Here’s what helps:

  • A coin beside the damage so we can judge size
  • A photo taken from further back
  • Daylight if possible, and no flash reflection
  • Any details about the material

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.

DIY kit or professional repair?

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

Your questions about bath repair in Kinloch Rannoch

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Perth and Kinross.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

When can you do it?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

When can I have a bath again?

Most baths can be used the day after. We confirm the time before we leave.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

Repair or replace: which is better?

Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. A repair keeps it in place. Prices start from £95. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.

Why us?

  • We’ll tell you if it’s not worth repairing
  • Most jobs done in one visit
  • Accredited with CHAS, Constructionline and SafeContractor
  • No extra charge for your area

Read our prices page or guide to resurfacing and replacement costs.

Materials and what they mean for the repair

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

How to care for the repair

To keep it looking its best for years:

  • Give the bath a quick rinse after use
  • Ensure an acrylic bath is firm underfoot
  • Stick to mild cleaners and a soft cloth
  • Fix dripping taps early to stop staining and limescale

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.

A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.