North Lincolnshire · England
Bath Repair in Ferriby Sluice
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Ferriby Sluice. Free, fixed quotes from your photos.
- Repairs from £95
- Chips along the edge of the bath
- Snagging damage from a refit
When a repair is not the answer
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- Rust that has eaten right through a steel bath
- Wear across the entire surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Ferriby Sluice
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
Bath repair in Ferriby Sluice, done in place
Most of our bath repairs take a few hours, and the bath is back in use the day after. You will not need a plumber or tiler, because nothing is disconnected. Common call-outs are for a chip where the taps sit and a chipped rim or side, on roll-top & freestanding, pressed steel enamel and acrylic.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Area
- Ferriby Sluice (DN18)
- Region
- North Lincolnshire
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Landlords, agents and businesses in Ferriby Sluice
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Ferriby Sluice: your questions answered
Can you redo an old repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Is there a guarantee?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Can you repair a hole in a bath?
Typically. Photos of the hole and the underside help us check.
Do you repair coloured baths?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Which areas do you work in?
Everywhere in the UK, Ferriby Sluice included. Travel is included in the price.
What about rust by the waste?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before.
Towns and villages near Ferriby Sluice
Other services in Ferriby Sluice
Prices and what affects them
Prices start from £95. We do not charge extra for travel to Ferriby Sluice. The price comes down to:
- What kind of damage it is
- Whether old repairs or coatings need taking off
- How much damage there is
- Whether we combine several jobs
Our prices are the same across the UK, so there’s no premium for Ferriby Sluice. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from photos
We price nearly every job from photos. This is what we need:
- One picture of the whole bath
- Details of any past repairs
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Repair or replace in Ferriby Sluice?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why us?
- Straight answers about what a repair can do
- Rooms protected and left tidy
- No need to remove anything
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list or bath cost comparison.
Signs you need bath repair in Ferriby Sluice
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal will start to rust.
Common reasons people in Ferriby Sluice contact us are:
- A hole punched through by something heavy
- Deep scratches in acrylic
- Hairline or through cracks in acrylic
- Rusty patches near the plughole
What your quote should include
- If travel is included in the price
- The length of the guarantee and what it covers
- What happens if the damage is worse than the pictures show
- Whether the price is fixed and includes VAT
About Ferriby Sluice
Ferriby Sluice is about 9 miles south-west of Kingston upon Hull, in North Lincolnshire. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Ferriby Sluice is one of 90 places in North Lincolnshire where we work. Our nearest city page is Leeds, about 43 miles away.
All of DN18 is covered, from the main roads to the quietest streets. From Andrews Road and Sluice Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include South Ferriby (1 mile east), Horkstow (2 miles south), Saxby All Saints (3 miles south), Winteringham (3 miles west) and Appleby (4 miles south-west). Larger places within reach include Scunthorpe (9 miles south-west), Barton-upon-Humber (3 miles east), Bottesford (11 miles south-west), Brigg (9 miles south), Frodingham (8 miles south-west) and Crosby (8 miles south-west).
What’s near Ferriby Sluice
In Ferriby Sluice, that means homes near Church of Saint Nicholas, Hope & Anchor pub and South Ferriby Primary School, among other places. Ferriby Sluice’s nearest station is Ferriby station, about 2.8 miles north. Other landmarks nearby include Hull and East Riding Hospital (5.5 miles north-east) and Barton upon Humber Castle (3.2 miles east). Green spaces nearby include Far Ings National Nature Reserve.
The process
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a morning or an afternoon, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
Getting a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Read more
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
