Essex · England
Bath chip & crack repair in Frinton-on-Sea, Essex
Problem with your bath in Frinton-on-Sea? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Snagging damage from a refit
- Chips on the rim or sides
Bath repair in Frinton-on-Sea, done in place
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, typically in a single visit. If you are dealing with hairline or through cracks in acrylic and deep scratches in acrylic, we can generally put it right, on acrylic, pressed steel enamel and cast iron enamel alike.
Whatever the size of the job, it’s backed by a one-year guarantee in Frinton-on-Sea and across Essex.
- Area
- Frinton-on-Sea (CO13, CO14)
- County
- Essex
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Frinton-on-Sea
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
Clients generally contact us about:
- A cracked acrylic bath
- A chip where the taps sit
- Scratches you can feel with a fingernail
- Damage done while the bathroom was being fitted
Questions to ask before booking
- What aftercare is recommended
- The length of the guarantee and what it covers
- Whether the price is fixed and includes VAT
- What happens if they find more damage
Why repair rather than replace?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Frinton-on-Sea
- Work done at your home or business
- A year’s guarantee on all work
- Rooms protected and left tidy
- Nothing taken out or refitted
Take a look at our prices page or resurfacing vs replacement cost guide.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Don’t leave razors or cans standing in the bath
- Rinse the bath after use, especially in hard water areas
- Have new chips seen to early
- Check that an acrylic bath does not move when you stand in it
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Frinton-on-Sea and nearby
Frinton-on-Sea is about 5 miles north-east of Clacton-on-Sea, in Essex. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. We work in 644 places in Essex, from the larger towns to small villages. Our jobs stretch from Frinton-on-Sea to London (about 62 miles away).
All of CO13 and CO14 is covered, from the main roads to the quietest streets. Whether you live on Glebe Way, Greenway and Pole Barn Lane or anywhere nearby, we can come to you. You will find Frinton-on-Sea on the B1033 and B1336, which makes it straightforward to reach. We also travel to Kirby Cross (1 mile north-west), Walton-on-the-Naze (1 mile north-east), Kirby-le-Soken (1 mile north-west), Great Holland (2 miles west) and Lane End (2 miles north-west). Larger places within reach include Colchester (15 miles west), Clacton-on-Sea (5 miles south-west), Harwich (7 miles north), Greenstead (14 miles west), Wivenhoe (12 miles west) and Brightlingsea (10 miles west).
Near you in Frinton-on-Sea
Our clients here include homes close to Tendring Technology College, Frinton Primary School and St Mary Magdalene and the streets around them. Also close by are The Lock and Barrel pub (less than half a mile south) and Frinton Park (within half a mile north). There’s a railway station in Frinton-on-Sea itself: Frinton-On-Sea station. Open spaces near Frinton-on-Sea include Great Holland Pits.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Common questions in Frinton-on-Sea
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Are there extra charges for Frinton-on-Sea?
No. Our quotes include travel, and we charge the same wherever you are.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Which areas do you work in?
We work UK-wide. Our prices are the same everywhere.
How long before I can use the bath?
Typically within a day, depending on the repair.
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Honest limits
It helps to know what we cannot do too:
- A bath that moves underfoot, until its support is fixed
- Metal that has corroded all the way through
- Cracks in acrylic we cannot reach from underneath
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
How the visit works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a few hours. We tidy up before we leave and tell you when it’s ready to use.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Have a window or extractor fan available
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Advice
Towns and villages near Frinton-on-Sea
More services for Frinton-on-Sea
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
About our accreditations · Every repair comes with a one-year guarantee.
