Essex · England
Bath Repair in Walton-on-the-Naze
Bath repair across Walton-on-the-Naze and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Chips under the taps
- Cracks in an acrylic bath
How we handle bath repair in Walton-on-the-Naze
A typical bath repair is a few hours’ work, and you can typically bathe again the following day. There is no need to book a plumber or tiler, because nothing is disconnected. If you’re dealing with a failed DIY repair that’s discoloured or lifting and chips on the rim or sides, we can help, on pressed steel enamel, acrylic and whirlpool & spa baths alike.
We stand behind the work with a one-year guarantee.
- Area
- Walton-on-the-Naze (CO14, CO13)
- Area hub
- Essex
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Put a towel in the bath if you’re working above it
- Store metal items away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Don’t leave a fresh chip for long
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
What bath repair costs
Repairs from £95. A fixed quote means you know the cost before booking. We take into account:
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- How easy the damage is to reach
- The material
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Two or three clear pictures are normally enough. Try to include:
- Natural light rather than flash
- What it’s made of, if you know
- Any earlier repairs or coatings
- A clear, close picture of the problem area
For a price in Walton-on-the-Naze, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why us?
- A year’s guarantee on all work
- Repair technicians who travel to you, UK-wide
- Colour mixed on the day to match
- No extra charge for your area
Take a look at our pricing and bath cost comparison.
When to call us in Walton-on-the-Naze
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
Get in touch if you’ve noticed:
- Hairline or through cracks in acrylic
- Damage done while the bathroom was being fitted
- Rust spots around the plughole
- A chip where the taps sit
What your quote should include
- Is the price fixed, and does it include VAT?
- How the room is protected while they work
- What prep work is covered
- Whether they match the colour on site
What we can’t put right
It helps to know what we cannot do too:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Acrylic cracks with no access behind them
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Pressed steel enamel
What happens on the day
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take a morning or an afternoon, tidy-up included.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the following day.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Related advice
FAQs for Walton-on-the-Naze
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and you’ll get one combined price.
Can you repair something that is been repaired before?
Generally, yes. We remove the old repair before doing a new one.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens once I’ve sent pictures?
We come back with a fixed price, plus dates. You are under no obligation.
Do you cover Walton-on-the-Naze?
Yes. We cover the whole UK and travel to Walton-on-the-Naze and the rest of Essex. Send us photos for a fixed quote, or call 0345 017 0787.
Do you cover the whole of Essex?
Everywhere in the UK, Walton-on-the-Naze included. Travel is included in the price.
Where we work around Walton-on-the-Naze
Walton-on-the-Naze is about 6 miles south of Harwich, in Essex. Jobs in Walton-on-the-Naze are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Our technicians cover all 644 towns and villages in Essex. Our jobs stretch from Walton-on-the-Naze to London (63 miles away).
All of CO14 and CO13 is covered. Local streets include Church Road, High Street and Victoria Road. You’ll find Walton-on-the-Naze on the B1034 and B1336, which makes it straightforward to reach. If you’re just outside Walton-on-the-Naze, we cover Frinton-on-Sea (1 mile south-west), Kirby Cross (1 mile west), Kirby-le-Soken (2 miles west), Great Holland (3 miles south-west) and Lane End (3 miles west). Larger places within reach include Clacton-on-Sea (6 miles south-west), Harwich (6 miles north), Greenstead (14 miles west), Wivenhoe (13 miles west), Brightlingsea (11 miles west) and West Mersea (15 miles west).
What’s near Walton-on-the-Naze
In Walton-on-the-Naze, that means homes near Walton on the Naze Primary School, Tendring Technology College and The Victory pub. Also close by are Frinton Park (0.8 miles south-west) and Church of All Saints (within half a mile east). There is a railway station in Walton-on-the-Naze itself: Walton-On-The-Naze station. Not far away are The Naze Nature Reserve.
Places near Walton-on-the-Naze
More services for Walton-on-the-Naze
About our accreditations · Every repair comes with a one-year guarantee.
