Wiltshire · England
Bath Repair for Netheravon homes
Bath repair in and around Netheravon: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- A chip where the taps sit
- Chips caused by builders
Bath repair at your home in Netheravon
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the day after. Our technicians work on cast iron enamel, acrylic and roll-top & freestanding, and people most often call us about a chip where the taps sit and scratches you can feel with a fingernail.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Area
- Netheravon (SP4)
- Area hub
- Wiltshire
- Warranty
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Flexing caused by a failed cradle or loose feet
- Wear across the whole surface, which needs re-enamelling
- A steel bath rusted through
Send us pictures and we will tell you honestly.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Covering Netheravon
Netheravon is about 5 miles north of Amesbury, in Wiltshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in 425 places across Wiltshire. We work right across the region, from Netheravon to London (about 75 miles away).
Here we cover the SP4 postcode area. That includes homes on High Street, Court Farm Road and Court Farm Close. Nearby, we also work in Haxton (1 mile north-east), Fittleton (1 mile north), Coombe (1 mile north-east), Figheldean (1 mile south-east) and Ablington (2 miles south-east). We also work in nearby towns such as Salisbury (11 miles south), Devizes (11 miles north-west), Amesbury (5 miles south), Marlborough (13 miles north), Bugmore (12 miles south) and Milford (12 miles south).
Near you in Netheravon
Around Netheravon, we work in homes near All Saints CofE Primary School, The Dog and Gun pub and Church of All Saints.
Questions from Netheravon
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one, so mention it when you send photos.
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Will there be a smell?
Expect a mild smell while we’re working that clears as it cures.
Are there extra charges for Netheravon?
Travel is included in the price, and we charge the same wherever you are.
Can you repair a crack in an acrylic bath?
Frequently, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Netheravon.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Landlord and trade work in Netheravon
We work for landlords, letting agents and housing providers in Netheravon as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Common problems we fix in Netheravon
A cracked acrylic bath normally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex until the acrylic gives way.
Look out for any of the following:
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
- Scratches you can feel with a fingernail
- A hole punched through by something heavy
Before booking anyone
- How to look after the finish
- Who will actually do the work
- How your room will be protected
- Whether the colour is mixed to match
What happens on the day
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to a morning or an afternoon.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, generally by the following day, the bath is ready to use.
Preparing for the visit
- Keep a parking space free if you can
- Let us know if it has been repaired before
- Move bottles, mats and clutter away from the area
Ask for a price
For a price in Netheravon, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Related advice
Can I fix it myself?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
More services for Netheravon
Prices and what affects them
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- Whether old repairs or coatings need taking off
- How much damage there is
- The material
- The colour and finish to match
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Phone pictures are fine, there’s no need for anything special. Ensure they show:
- What it’s made of, if you know
- Natural light rather than flash
- A wider photo showing the whole bath
- A coin beside the damage so we can judge size
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Aftercare tips
To keep it looking its best for years:
- Rinse it down after each bath
- Check that an acrylic bath does not move when you stand in it
- Don’t leave a fresh chip for long
- Clean with warm water and a mild detergent
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
About our accreditations · Every repair comes with a one-year guarantee.
