Somerset · England
Bath chip & crack repair in Gare Hill, Somerset
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Gare Hill. Free, fixed quotes from your pictures.
- Repairs from £95
- An old repair that has yellowed or come loose
- A hole punched through by something heavy
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Do not leave a fresh chip for long
- Check that an acrylic bath doesn’t move when you stand in it
- A dripping tap stains enamel, so fix it early
- Cover the bath during DIY or decorating
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
Bath repair in Gare Hill, done in place
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. If you are dealing with a hole punched through by something heavy and a chip where the taps sit, we can help, on whirlpool & spa baths, cast iron enamel and pressed steel enamel alike.
You get a one-year guarantee, the same in Gare Hill as everywhere else we work.
- Where
- Gare Hill (BA11)
- Area hub
- Somerset
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Gare Hill
More services for Gare Hill
Common questions in Gare Hill
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
It’s been repaired before. Can you still fix it?
Usually, yes. We remove the old repair before doing a new one.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Is there a guarantee?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Prices and what affects them
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- Previous DIY repairs that have to come out
- How many areas need work
- What the surface is made of
- Doing more than one item at once
We charge the same wherever you are, with no extra for Gare Hill. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from pictures
Photographing the damage takes a minute. Please include:
- A close-up of the damage, in focus
- Any details about the material
- A picture taken from further back
- Details of any past repairs
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
How it works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Let the surface dry out before the visit
- Move bottles, mats and clutter away from the area
- Tell us about any previous repairs or coatings
Getting a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Read more
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why choose Surface Doctor in Gare Hill
- A year’s guarantee on all work
- Typically one visit, start to finish
- Nothing taken out or refitted
- Work done at your home or business
See our pricing or guide to resurfacing and replacement costs.
Do you need bath repair in Gare Hill?
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
The most common problems we are called about are:
- An old repair that has yellowed or come loose
- A chipped rim or side
- A cracked acrylic bath
- Rust spots around the plughole
What to look for in a quote
- Whether a trained technician does the job
- How the colour is matched
- What happens if they find more damage
- How the room is protected while they work
Covering Gare Hill
Gare Hill is about 5 miles south of Frome, in Somerset. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 640 places across Somerset.
Jobs in BA11 work the same way as everywhere else we cover. We also cover the places around Gare Hill: Yarnfield (1 mile south), Witham Friary (2 miles west), Lower Marston (3 miles north), Kilmington (3 miles south) and Trudoxhill (3 miles north-west). Further out, we also cover Frome (5 miles north), Wells (15 miles west), Midsomer Norton (11 miles north-west), Shepton Mallet (10 miles west), Radstock (11 miles north-west) and Wincanton (8 miles south-west).
Local landmarks in Gare Hill
The closest station to Gare Hill is Frome station, roughly 4.6 miles north of the centre. A little further out are Nunney Castle (4.3 miles north-west). For a walk, there is White Sheet Hill and Shearwater.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
