Somerset · England

Bath chip & crack repair in Witham Friary, Somerset

Bath repair in and around Witham Friary: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Scratches you can feel with a fingernail
  • Rust spots around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Witham Friary

What happens on the day

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes two to three hours for most chips, and we finish by cleaning up and talking you through the result.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Let the surface dry out before the visit
  • Tell us if there are stairs or a lift
  • Let us know about parking or access

Ask for a price

Upload a photo of the damage and one of the whole item, with your BA11 postcode, and we’ll come back with a fixed quote.

Get a fixed price

Read more

How we handle bath repair in Witham Friary

A typical bath repair is a few hours’ work, and the bath is back in use the next day. There’s no need to book a plumber or tiler, because the bath doesn’t move. We are often asked to fix a chip where the taps sit and chips along the edge of the bath, across cast iron enamel, acrylic and pressed steel enamel.

Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Bath enamel chip by the waste, filled and colour matched (before and after)
Where
Witham Friary (BA11)
County
Somerset
Cover
One year on every repair
Quote
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026

Prices and what affects them

Prices start from £95. We do not charge extra for travel to Witham Friary. The price comes down to:

  • Whether we combine several jobs
  • The colour and finish to match
  • Access to the area
  • What kind of damage it is

A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

Quotes from your photos

We price nearly every job from photos. This is what to send:

  • Your postcode, so we can check dates
  • A close-up of the damage, in focus
  • Something in shot to show the size
  • Any earlier repairs or coatings

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.

How to look after the repair

Much of the damage we repair could have been avoided. These habits help:

  • Keep abrasive pads and gritty cleaners away from the bath
  • Don’t leave a fresh chip for long
  • Keep metal cans and razors off the surface
  • Cover the bath during DIY or decorating

Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.

A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.

Repairs by material

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.

When we’d advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • A steel bath rusted through
  • Water coming from the waste or taps rather than the bath
  • Cracks in parts of an acrylic bath we can’t get to from below

If in doubt, send pictures and we’ll say what we think before you book.

What we work on

  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Cast iron enamel

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

What we’re called out for in Witham Friary

A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.

Look out for any of the following:

  • Impact holes in acrylic
  • Chips along the edge of the bath
  • Scratches you can feel with a fingernail
  • Hairline or through cracks in acrylic

What your quote should include

  • Who will actually do the work
  • How the room is protected while they work
  • What happens if they find more damage
  • How to look after the finish

Choosing a repair company

Witham Friary: your questions answered

Will there be a smell?

It depends on the job, but frequently a little. Ventilation keeps it to a minimum.

Do you charge for travel?

We don’t add a call-out fee. Your fixed quote includes everything.

Is it worth repairing rather than replacing?

Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Can you repair a chip on a coloured bath?

Yes, coloured baths are no problem. We tint the finish to your bath on site.

What happens after I send pictures?

We review the pictures and send a fixed quote and the next dates we have.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.

Witham Friary and the surrounding area

Witham Friary is about 5 miles south-west of Frome, in Somerset. We visit homes and businesses in Witham Friary and the surrounding area, so there is no workshop to go to. Witham Friary is one of 640 towns and villages in Somerset where we work.

All of BA11 is within our area, from the main roads to the quietest streets. Close by, we cover Trudoxhill (2 miles north), Gare Hill (2 miles east), Lower Marston (3 miles north-east), North Brewham (3 miles south-west) and Yarnfield (3 miles south-east). Further out, we also cover Frome (5 miles north-east), Wells (13 miles west), Midsomer Norton (10 miles north-west), Shepton Mallet (8 miles west), Glastonbury (15 miles west) and Radstock (9 miles north-west).

Local landmarks in Witham Friary

Our customers here include homes close to Seymour Arms Public House and Church of St Mary, among other places. The closest station to Witham Friary is Frome station, about 4.8 miles north-east. Other landmarks nearby include Nunney Castle (2.9 miles north). Not far away are Vallis Vale and Aaron's Hill.

Map of Witham Friary © OpenStreetMap contributors

Why repair rather than replace?

If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before booking.

Why Witham Friary customers choose us

  • Straight answers about what a repair can do
  • Colours mixed by hand to suit your surface
  • Free fixed quotes from pictures
  • Rooms protected and left tidy

Read our prices page or guide to resurfacing and replacement costs.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.