Wiltshire · England
Bath chip & crack repair in Kilmington, Wiltshire
Bath repair across Kilmington and nearby, generally in one visit.
- Repairs from £95
- Chips along the edge of the bath
- Cracks in an acrylic bath
Should you replace it?
Many people think a damaged bath means a new one. Normally it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- One visit for most repairs
- CHAS, Constructionline and SafeContractor accredited
- Free fixed quotes from pictures
- Everything repaired in place
Read our prices page or resurfacing vs replacement cost guide.
Bath repair in Kilmington, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s chips caused by builders and impact holes in acrylic, we can help.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Location
- Kilmington (BA12)
- County
- Wiltshire
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Kilmington questions
Do you come to Kilmington?
We do. We send a technician to Kilmington for every job, and the price is the same as everywhere else.
What areas do you cover?
We work UK-wide, so Kilmington is covered. Our prices are the same everywhere.
Are there extra charges for Kilmington?
There’s no separate call-out charge. Your fixed price includes everything.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
Can you repair a crack in an acrylic bath?
Frequently, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Rinse it down after each bath
- Avoid scourers, wire wool and gritty cream cleaners
- Store metal items away from the bath
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
What we are called out for in Kilmington
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.
It’s worth getting a quote if you see:
- A hole punched through by something heavy
- Chips along the edge of the bath
- An old repair that has yellowed or come loose
- Chips caused by builders
Questions to ask before you book
- Aftercare advice
- When it can be used again
- What happens if they find more damage
- Who will actually do the work
What affects the price in Kilmington
Repairs from £95. We charge the same across the UK, including Kilmington. The price reflects:
- Unusual colours or finishes
- What kind of damage it is
- How many areas need work
- How many items we do on one visit
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Where you are, by postcode
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
About Kilmington
Kilmington is about 8 miles south of Frome, in Wiltshire. We visit customers in Kilmington and the surrounding area, so you do not need to take anything anywhere. Kilmington is one of 425 places in Wiltshire we cover.
All of BA12 is covered, from the main roads to the quietest streets. We regularly work on streets such as Church Road, The Street and Cote Lane and the roads around them. We also cover the places around Kilmington: Stourton (1 mile south), Yarnfield (1 mile north), Gare Hill (3 miles north), South Brewham (3 miles west) and North Brewham (3 miles west). We also work in nearby towns such as Trowbridge (15 miles north), Westbury (11 miles north-east), Warminster (8 miles north-east), Paxcroft Mead (15 miles north-east), Mere (3 miles south-east) and Tisbury (11 miles east).
Local landmarks in Kilmington
Typical jobs here are in homes near Church of St Mary and the streets around them. Well-known places in the area include Mere Castle (3.1 miles south-east) and Mere Museum (3.2 miles south-east). Open spaces near Kilmington include Aaron's Hill.
- Parks and local facilities nearby include Four Towers (2.9 miles south-west)
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Also near Kilmington
Other services in Kilmington
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
When we’d advise against a repair
It helps to know what we can’t do:
- Leaking fittings, which need a plumber
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Cracks in acrylic we can’t reach from underneath
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Pressed steel enamel
What happens on the day
There’s not much you need to do on the day. Let us in and show us the room, and we will get on with it. Most visits take two to three hours for most chips, tidy-up included.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Ensure the area is dry
- Keep children and pets away from the room on the day
- Clear the area around the damage
Ask for a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
