Wirral · England
Bath chip & crack repair in Gayton, Wirral
Damaged bath in Gayton? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Chips under the taps
- Scratches you can feel with a fingernail

Keeping it looking good
How the surface is treated afterwards matters:
- Keep abrasive pads and gritty cleaners away from the bath
- Clean with warm water and a mild detergent
- Put a towel in the bath if you’re working above it
- Fix dripping taps early to stop staining and limescale
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
How we handle bath repair in Gayton
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We regularly repair whirlpool & spa baths, acrylic and cast iron enamel, and common reasons people contact us are scuffs and scratches in the surface and a kit repair that didn’t last.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Gayton (CH60)
- Area hub
- Wirral
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026

What we cannot put right
A few problems are outside what a surface repair can do:
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
- Wear across the entire surface, which needs re-enamelling
Send us pictures and we’ll tell you honestly.
Materials we work on in Gayton
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
Gayton and the surrounding area
Gayton is about 1 mile south of Heswall, in Wirral. Anywhere in CH60, we carry out the work at your property. Our technicians cover 44 places in Wirral, from the larger towns to small villages. You can also see our page for Liverpool, about 9 miles away.
Our repair technicians cover all of the CH60 postcode area and the streets around it. That includes homes on Brow Lane, Gayton Road and Seabank Road and the roads around them. If you’re just outside Gayton, we cover Thurstaston (2 miles north-west), Dawpool (3 miles north-west), Irby Hill (3 miles north), Caldy (4 miles north-west) and Frankby (4 miles north). We also work in nearby towns such as Birkenhead (5 miles north-east), Wallasey (7 miles north), Bebington (5 miles east), Moreton (6 miles north), West Kirby (5 miles north-west) and Bromborough (5 miles east).
Around Gayton
In Gayton, that means homes near Black Horse pub, Pensby High School and The Puddydale. Other local landmarks include St Peter's Church (within half a mile north) and Gayton Primary School (under half a mile east). For rail, the closest station is Heswall station, about 1.4 miles north-east. A little further out are Flint Castle (4.8 miles south) and The Clatterbridge Cancer Centre (3.1 miles east). Not far away are West Kirby Marine Lake and Burton Mere Wetlands.
- Other local spots include Heswall cum Oldfield (0.8 miles north-west)
How it works
There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. Most visits take a few hours, tidy-up included.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
- Let us know which floor the room is on
Get a quote
If you’re in Gayton and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Read more
Common questions in Gayton
What areas do you cover?
Everywhere in the UK, Gayton included. Travel is included in the price.
Will the repair last?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Is repairing better than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Is a cracked acrylic bath repairable?
Typically, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Will the repair show?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Do you need bath repair in Gayton?
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Look out for any of the following:
- Rusty patches near the plughole
- A chipped rim or side
- Damage beneath the taps
- A hole punched through by something heavy
What to look for in a quote
- Whether there are any call-out or travel charges
- How the colour is matched
- How long it needs to cure
- What happens if they find more damage
Other services in Gayton
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
How we price bath repair
Prices start from £95. We charge the same across the UK, including Gayton. The price reflects:
- How hard the colour is to match
- Access to the area
- Any earlier repairs that need removing first
- What the surface is made of
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
Good photos mean an accurate price. Here’s what helps:
- One sharp close-up of the damage
- A photo taken from further back
- Good light, ideally daylight, without flash glare
- The material, if you know it
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and you are under no obligation.
Landlord and trade work in Gayton
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.

