Cumbria · England

Bath Repair for Greenholme homes

Bath repair in Greenholme without the cost of replacing. Get a fixed quote from your photos, then we come to you.

  • Repairs from £95
  • A chip where the taps sit
  • A failed DIY repair that is discoloured or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Greenholme

About our bath repair in Greenholme

Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Common call-outs are for a cracked acrylic bath and scratches you can feel with a fingernail, on pressed steel enamel, acrylic and cast iron enamel.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.

Rusty chip next to a bath plughole, before and after repair
Where
Greenholme (CA10)
Region
Cumbria
Cover
A year, on every repair
Quote
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026

Repairs by material

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.

Can I fix it myself?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Do you need bath repair in Greenholme?

Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.

Most people get in touch when they notice something like this:

  • Chips caused by builders
  • Deep scratches in acrylic
  • A hole punched through by something heavy
  • A kit repair that didn’t last

Before booking anyone

  • Who turns up on the day
  • Is the price fixed, and does it include VAT?
  • Whether the price covers travel
  • How the room is protected while they work

Our hiring checklist

When we’d advise against a repair

We’ll always be straight with you, so here’s what a repair will not do:

  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A bath that moves underfoot, until its support is fixed

Send us pictures and we’ll tell you honestly before you book.

What we work on

  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding

How to care for the repair

Much of the damage we repair could have been avoided. These habits help:

  • Stick to mild cleaners and a soft cloth
  • Rinse it down after each bath
  • Don’t leave a fresh chip for long
  • Cover the bath during DIY or decorating

There’s nothing special to do after a repair, beyond gentle cleaning. Avoid bleach-based and gritty cleaners.

Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.

The process

Your technician turns up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, depending on the damage, and the room is left clean and tidy.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. Finish coats go on, then the repair is polished to blend in.
  5. Once it has cured, usually by the day after, the bath is ready to use.

How to prepare

  • Open a window if you can
  • Mention any earlier repairs or resurfacing
  • Let us know which floor the room is on

Ask for a price

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Get a fixed price

Related advice

For landlords and businesses

Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

FAQs for Greenholme

Do the materials smell?

A little, depending on the job. Ventilation keeps it to a minimum.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Is a repair better than a new one?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.

It’s been repaired before. Can you still fix it?

Generally, yes. Tell us what was done before and we’ll plan for it.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

When can you do it?

We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Will the repair last?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

What does bath repair cost?

Repairs from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.

About Greenholme

Greenholme is about 10 miles north-east of Kendal, in Cumbria. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Greenholme is one of 438 towns and villages in Cumbria we cover. Our jobs stretch from Greenholme to Newcastle upon Tyne (about 54 miles away).

We cover every part of CA10. Close by, we cover Old Tebay (1 mile east), Tebay (1 mile south-east), Orton (2 miles north-east), Grayrigg (5 miles south) and Crosby Ravensworth (6 miles north). Larger places within reach include Kendal (10 miles south-west), Windermere (12 miles west), Appleby-in-Westmorland (11 miles north-east), Ambleside (14 miles west), Bowness-on-Windermere (13 miles south-west) and Sedbergh (9 miles south-east).

What’s near Greenholme

Green spaces nearby include Winterscleugh.

Map of Greenholme © OpenStreetMap contributors

Repairing versus replacing in Greenholme

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before booking.

Why book with us

  • Same prices wherever you are
  • Dust sheets down, tidy finish
  • Everything repaired in place
  • Accredited with CHAS, Constructionline and SafeContractor

Take a look at our prices page or resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.