Brighton and Hove · England

Bath chip & crack repair in Hangleton, Brighton and Hove

Bath repair in Hangleton without the cost of replacing. Send us pictures for a fixed quote, then we come to you.

  • Repairs from £95
  • Scuffs and scratches in the surface
  • Hairline or through cracks in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Hangleton?

Covering Hangleton

Hangleton is about 1 mile north-west of Brighton and Hove, in Brighton and Hove. Whether you’re in the middle of Hangleton or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover all 30 towns and villages in Brighton and Hove, from the larger towns to small villages. You can also see our page for London, about 45 miles away.

All of BN3 and BN41 is within our area, from the main roads to the quietest streets. Streets in the area include Meads Avenue, Warenne Road and Burwash Road, and we cover them all. You will find Hangleton on the A2038, which makes it straightforward to reach. Neighbouring places we cover include Portslade (1 mile south-west), Southwick (2 miles south-west), Kingston by Sea (2 miles west), Fulking (3 miles north) and Shoreham-by-Sea (3 miles west). Within a short drive, we also cover Brighton (3 miles east), Carlton Hill (3 miles south-east), Hanover (3 miles south-east), West Hill (3 miles south-east), Brunswick (3 miles south-east) and Seven Dials (3 miles south-east).

Local landmarks in Hangleton

We visit homes around Blatchington Mill School and Sixth Form College, St Helen's Church and Hangleton Primary School and the streets around them. Also close by are Benfield Hill (0.6 miles north-west) and The Downsman pub (less than half a mile north-east). For rail, the closest station is Portslade station, about 1 mile south. Further afield, we also cover the area around Clayton Castle (4.7 miles north-east) and British Engineerium (1.1 miles east). Not far away are Ladies Mile and Thundersbarrow Hill.

Map of Hangleton © OpenStreetMap contributors

Bath repair at your home in Hangleton

We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Our repair technicians work on cast iron enamel, roll-top & freestanding and pressed steel enamel, and the jobs we see most are chips caused by builders and rust spots around the plughole.

Every repair is covered by a one-year guarantee, wherever you are in Brighton and Hove.

Before and after: a damaged acrylic bath corner repaired in place
Area
Hangleton (BN3, BN41)
Region
Brighton and Hove
Warranty
12 months on all our work
Quote
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Common questions in Hangleton

How long does the repair take to cure?

Most baths can be used the following day. We’ll tell you the exact curing time when we finish.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

I tried a repair kit. Can you fix it?

Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Can tenants book a repair?

We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

Can I get a quote without a visit?

Nearly always. If photos don’t show enough, we will ask for another angle.

Do you repair coloured baths?

Yes, coloured baths are no problem. The colour is tinted by hand on the day.

Are there extra charges for Hangleton?

There’s no separate call-out charge. The fixed price covers the visit and the work.

What a repair can’t fix

Honesty matters more than a booking, so here’s what a repair won’t do:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Water coming from the waste or taps rather than the bath
  • A steel bath rusted through

Send us photos and we’ll tell you honestly.

What we work on

  • Cast iron enamel
  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding

What happens on the day

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a few hours, depending on the damage. We clean up when we are done and tell you when it’s ready to use.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Have a window or extractor fan available
  • Move bottles, mats and clutter away from the area
  • Keep a parking space free if you can

Getting a price

There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Send photos for a quote

Related advice

Repairing versus replacing in Hangleton

A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. The price reflects the work involved, not your postcode. You’ll see the full price before booking, with nothing added on the day.

Why choose Surface Doctor in Hangleton

  • Most jobs done in one visit
  • Everything repaired in place
  • A fixed quote before booking
  • No extra charge for your area

Read our prices page and resurfacing vs replacement cost guide.

Prices and what affects them

Repairs from £95. We price every job individually, from your photos. What matters most is:

  • How many areas need work
  • The type of damage
  • Doing more than one item at once
  • Unusual colours or finishes

We charge the same wherever you are, with no extra for Hangleton. What changes the price is the job itself: how much damage, what it’s made of and how many items.

How to get a fixed quote

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • What it’s made of, if you know
  • The postcode, so we can plan the visit
  • Something in shot to show the size
  • Good light, ideally daylight, without flash glare

To get a price, send a couple of photos through our quote form or call us. We will tell you honestly whether it can be repaired.

How to look after the repair

Looking after the surface is easy, and it makes a real difference:

  • Have new chips seen to early
  • Avoid scourers, wire wool and gritty cream cleaners
  • Ensure an acrylic bath is firm underfoot
  • Use a soft cloth and washing-up liquid for everyday cleaning

Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.

Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.

What we are called out for in Hangleton

Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the bath move until it cracks.

Send us a photo if you notice any of these:

  • Holes from dropped items
  • Damage done while the bathroom was being fitted
  • Rusty patches near the plughole
  • A chipped rim or side

What to look for in a quote

  • What happens if they find more damage
  • Who turns up on the day
  • If travel is included in the price
  • A fixed price, and whether VAT is included

10 questions to ask before you book

For landlords and businesses

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

DIY repairs versus a professional job

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.