Oxfordshire · England
Bath Repair for Henwood homes
Bath repair in and around Henwood: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A kit repair that didn’t last
- A chip where the taps sit
Henwood: your questions answered
How much does bath repair cost in Henwood?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
What happens after I send pictures?
You will get a fixed quote back, usually with dates to choose from. You’re under no obligation.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Do you charge for travel?
There is no separate call-out charge. Your fixed quote includes everything.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Henwood.
Do you cover Henwood?
Yes. We work across the UK and travel to Henwood and the rest of Oxfordshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
About our bath repair in Henwood
You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. If you are dealing with chips on the rim or sides and chips caused by builders, we can generally put it right, whatever the material.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Henwood (OX1)
- County
- Oxfordshire
- Guarantee
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A steel bath rusted through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Cracks in parts of an acrylic bath we cannot get to from below
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
Why repair rather than replace?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. A repair deals only with the damage in a single visit. Prices start from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
What you get with us
- Repair technicians who travel to you, UK-wide
- A fixed quote before booking
- One price list for the whole UK
- Colour-matched on site
Take a look at our full price list or guide to resurfacing and replacement costs.
Also near Henwood
What else we do in Henwood
For landlords and businesses
Landlords, letting agents and housing providers in Henwood use us as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Covering Henwood
Henwood is about 3 miles north-west of Abingdon-on-Thames, in Oxfordshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Henwood is one of 443 towns and villages in Oxfordshire we cover. You can also see our page for London, about 55 miles away.
Every address in OX1 is covered, from the main roads to the quietest streets. From Cumnor Road, Hill View Lane and White Hill Lane or a nearby road, we can come to you. Close by, we cover Wootton (1 mile south), Cumnor (1 mile north-west), Chawley (1 mile north), Appleton (2 miles west) and Dean Court (2 miles north). Further out, we also cover Oxford (5 miles north-east), Didcot (8 miles south-east), Bicester (15 miles north-east), Abingdon-on-Thames (3 miles south-east), Witney (9 miles north-west) and Carterton (12 miles west).
Near you in Henwood
Around Henwood, we work in homes near Wootton St Peter's Church of England Primary School, Church of St Peter and Matthew Arnold School and the streets around them. Henwood’s nearest station is Oxford station, about 3.4 miles north-east. Nearby you’ll also find Westgate Shopping Centre (3.5 miles north-east) and The Story Museum (3.6 miles north-east). The countryside around Henwood includes Cumnor Hill and Lashford Lane Fen.
Prices and what affects them
Prices start from £95. We give every job a fixed quote from photos. This is what makes a difference:
- How many areas need work
- The material
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with nothing added on the day.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what helps:
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- One sharp close-up of the damage
- Any details about the material
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.
Signs you need bath repair in Henwood
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Common reasons people in Henwood contact us include:
- Chips on the rim or sides
- A kit repair that didn’t last
- Rust spots around the plughole
- Chips caused by builders
What to look for in a quote
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- Whether there are any call-out or travel charges
- Aftercare advice
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which typically takes a morning or an afternoon. If anything looks different from your photos, we will talk to you before going ahead.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Let the surface dry out before the visit
- Keep a parking space free if you can
- Plan for the room to be out of bounds to pets and children
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
