Staffordshire · England

Bath chip & crack repair in High Offley, Staffordshire

Bath repair across High Offley and nearby, done in a single visit in most cases and guaranteed for a year.

  • Repairs from £95
  • A cracked acrylic bath
  • A kit repair that didn’t last
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in High Offley

Bath repair at your home in High Offley

A damaged bath doesn’t have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. We’re often asked to fix scuffs and scratches in the surface and a chip where the taps sit, across whirlpool & spa baths, cast iron enamel and acrylic.

All our work comes with our one-year guarantee.

Where
High Offley (ST20)
Area hub
Staffordshire
Warranty
One year on every repair
Quotes
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Keeping it looking good

Much of the damage we repair could have been avoided. A few tips:

  • Ensure an acrylic bath is firm underfoot
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Cover the bath during DIY or decorating
  • Keep abrasive pads and gritty cleaners away from the bath

In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.

Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Take it off before we arrive.

What we cannot put right

A repair is not right for every job, for example:

  • Cracks in parts of an acrylic bath we can’t get to from below
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Metal that has corroded all the way through

If in doubt, send pictures and we will say what we think before you book.

Surfaces we repair

  • Roll-top & freestanding
  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Acrylic

High Offley questions

Can you repair a failed DIY repair?

Regularly. We strip it out, deal with any rust and repair it again.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

What does bath repair cost?

Prices start from £95. We give a fixed price from your photos. Send a close-up and a photo of the entire item with your ST20 postcode.

Do I have to be there?

Yes. We need access to the room while we work, at a time we agree with you.

Can you repair a crack in an acrylic bath?

Normally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.

Can landlords book you?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

What happens if you find more damage?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

Can I fix it myself?

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

Signs you need bath repair in High Offley

Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.

Most people get in touch after spotting something like this:

  • A cracked acrylic bath
  • Deep scratches in acrylic
  • Rust by the waste and overflow
  • Chips under the taps

What to look for in a quote

  • When it can be used again
  • Aftercare advice
  • The length of the guarantee and what it covers
  • What protection goes down before work starts

Choosing a repair company

Prices and what affects them

Repairs from £95. There is no charge for travel to High Offley. The price depends on:

  • Access to the area
  • Whether old repairs or coatings need taking off
  • Whether we combine several jobs
  • How much damage there is

Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

Quotes from your pictures

Almost every job we do is priced from pictures. This is what to send:

  • Natural light rather than flash
  • Something in shot to show the size
  • Whether it’s been repaired or coated before
  • A wider photo showing the entire bath

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Where we work around High Offley

High Offley is about 5 miles north-east of Newport, in Staffordshire. Jobs in High Offley are booked in like any other job: a fixed quote from your photos, then a visit to do the work. Our repair technicians cover all 512 towns and villages in Staffordshire. Our jobs stretch from High Offley to Birmingham (about 31 miles away).

Every address in ST20 is covered. Close by, we cover Shebdon (1 mile south-west), Woodseaves (1 mile east), Adbaston (2 miles north-west), Norbury (2 miles south) and Offleyhay (2 miles north-east). Larger places within reach include Stafford (9 miles east), Newcastle-under-Lyme (13 miles north), Longton (13 miles north-east), Stone (9 miles north-east), Penkridge (12 miles south-east) and Adderley Green (14 miles north-east).

What’s near High Offley

Typical jobs here are in homes near St Mary's Church and Anchor Inn, among other places. Well-known places in the area include Weston Jones Motte (1.5 miles south-west). The countryside around High Offley includes Loynton Moss and Cop Mere.

Map of High Offley © OpenStreetMap contributors

How the visit works

Arrival times are agreed in advance, so you know when to expect us. On site, it takes a morning or an afternoon in most cases. We leave the room clean and ready to use once it has cured.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the following day.

Getting ready for the visit

  • Clear the area around the damage
  • Let us know if it has been repaired before
  • Let us know which floor the room is on

Ask for a price

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.

Get a free quote

Related advice

Repairs by material

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.

For landlords and businesses

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.