Derbyshire · England
Bath chip & crack repair in Higham, Derbyshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Higham, with a one-year guarantee on every repair.
- Repairs from £95
- Hairline or through cracks in acrylic
- Chips on the rim or sides
How it works
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a few hours, and we finish by cleaning up and talking you through the result.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
- Avoid using the area for a few hours before we arrive
Get a quote
Most customers in Higham get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
About our bath repair in Higham
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. If you’re dealing with a hole punched through by something heavy and rusty patches near the plughole, we can help.
You get a one-year guarantee, the same in Higham as everywhere else we work.
- Where
- Higham (DE55)
- County
- Derbyshire
- Warranty
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we cannot put right
In fairness, some problems need a different fix:
- Cracks in acrylic we cannot reach from underneath
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Higham
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
Do you need bath repair in Higham?
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
People generally call us when they notice one of these:
- Damage done while the bathroom was being fitted
- Damage beneath the taps
- Hairline or through cracks in acrylic
- Impact holes in acrylic
What to look for in a quote
- The length of the guarantee and what it covers
- What happens if they find more damage
- How the colour is matched
- What preparation is included
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Places near Higham
More services for Higham
About Higham
Higham is about 5 miles north of Ripley, in Derbyshire. From the centre of Higham to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Higham is one of 532 places in Derbyshire where we work. You can also see our page for Manchester, about 41 miles away.
All of DE55 is within our area. From Chesterfield Road, Strettea Lane and New Street or anywhere nearby, we can come to you. Nearby, we also work in Shirland (1 mile south-east), Mickley (1 mile north), Ogston (1 mile north-west), Wessington (2 miles south-west) and Brackenfield (2 miles west). Within a short drive, we also cover Chesterfield (8 miles north), Ilkeston (11 miles south), Belper (7 miles south), Heanor (8 miles south), Dronfield (12 miles north) and Ripley (5 miles south).
Around Higham
Typical jobs here are in homes near St Leonard's Church, Mickley Infant School and The Woolpack pub, among other places. For rail, the closest station is Alfreton station, roughly 2.5 miles south-east of the centre. Well-known places in the area include Clay Cross Hospital (2.8 miles north) and Clay Cross Urban District (2.5 miles north).
Your questions about bath repair in Higham
Is there any odour?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Is a repair better than a new one?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can you repair a failed DIY repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
What happens next?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
For landlords and businesses
For anyone letting property in or around Higham, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Prices and what affects them
Prices start from £95. We price every job individually, from your pictures. What matters most is:
- Access to the area
- The material and finish
- How hard the colour is to match
- Previous DIY repairs that have to come out
The price reflects the work involved, not where you live. You’ll see the full price before booking, with nothing added on the day.
Getting a price from photos
You can take the photos on your phone, there’s no need for anything special. Make sure they show:
- Any earlier repairs or coatings
- A wider photo showing the whole bath
- Something in shot to show the size
- Your postcode, so we can check dates
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Rinse the bath after use, especially in hard water areas
- Protect the bath with a towel when doing jobs nearby
- Have new chips seen to early
- Avoid scourers, wire wool and gritty cream cleaners
There is nothing special to do after a repair, just sensible cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
About our accreditations · Every repair comes with a one-year guarantee.
