Staffordshire · England
Bath Repair for Holmcroft homes
Our repair technicians come to Holmcroft for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- A kit repair that didn’t last
- A chip where the taps sit
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Bath repair in Holmcroft without replacing anything
Most of our bath repairs take a few hours, and you can generally bathe again the day after. You won’t need a plumber or tiler, because the bath doesn’t move. If you’re dealing with hairline or through cracks in acrylic and rust spots around the plughole, we can typically put it right, on whirlpool & spa baths, pressed steel enamel and acrylic alike.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Holmcroft (ST16)
- County
- Staffordshire
- Warranty
- A year, on every repair
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
About Holmcroft
Holmcroft is about 1 mile north of Stafford, in Staffordshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our repair technicians cover all 512 towns and villages in Staffordshire. Our jobs stretch from Holmcroft to Birmingham (about 26 miles away).
Postcode districts we cover here: ST16. Jobs here include addresses on Crab Lane, Berry Road and Stone Road and the roads around them. Holmcroft sits on or near the A5013, so getting to you is simple. If you’re just outside Holmcroft, we cover Tillington (1 mile east), Creswell (1 mile north-west), Doxey (1 mile south-west), Stafford (1 mile south) and Beaconside (2 miles south-east). Within a short drive, we also cover Newcastle-under-Lyme (14 miles north), Cannock (10 miles south-east), Longton (11 miles north), Rugeley (9 miles south-east), Burntwood (13 miles south-east) and Stone (5 miles north).
Near you in Holmcroft
Typical jobs here are in homes near Sir Graham Balfour School, Chetwynd Centre and Saint Bertelin's Church and the streets around them. You will also find William Salt Library (1.3 miles south-east) and Tillington Manor Primary School (under half a mile south). For rail, the closest station is Stafford station, roughly 1.4 miles south. Nearby you’ll also find Stafford Castle (1.9 miles south) and St George's Hospital (1 mile south-east). Green spaces nearby include Doxey Marshes and Tixall Wide.
What we can’t put right
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- Flexing caused by a failed cradle or loose feet
- A bath worn all over, where resurfacing makes more sense
- Leaking fittings, which need a plumber
If in doubt, send photos and we will say what we think.
Materials we repair
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Prices start from £95. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with no extras added later.
Why choose Surface Doctor in Holmcroft
- One price list for the whole UK
- A fixed quote before you book
- Colour-matched on site
- One visit for most repairs
See our prices page or guide to resurfacing and replacement costs.
How the visit works
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a few hours. If we find something your photos didn’t show, we will explain it before carrying on.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
- Have somewhere for us to park nearby if possible
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Advice
Towns and villages near Holmcroft
What else we do in Holmcroft
How to look after the repair
Nothing complicated is needed:
- Keep metal cans and razors off the surface
- Keep abrasive pads and gritty cleaners away from the bath
- Protect the bath with a towel when doing jobs nearby
- Check that an acrylic bath doesn’t move when you stand in it
Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
Landlord and trade work in Holmcroft
If you manage property in Holmcroft, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
FAQs for Holmcroft
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
When can I have a bath again?
Generally within a day, though it depends on what we have done.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
What happens after I send photos?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Do you charge for travel?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Can you repair a hole in a bath?
Usually, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Do you need bath repair in Holmcroft?
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.
These are the problems we are asked about most:
- Scratches you can feel with a fingernail
- A chip where the taps sit
- A kit repair that didn’t last
- Holes from dropped items
Before you book anyone
- How the colour is matched
- Whether the price covers travel
- What the guarantee covers, and for how long
- Whether a trained technician does the job
About our accreditations · Every repair comes with a one-year guarantee.
