Aberdeenshire · Scotland
Bath Repair for Kennethmont homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Kennethmont and across Aberdeenshire. Send pictures for a free, fixed quote.
- Repairs from £95
- Impact holes in acrylic
- Rusty patches near the plughole
Repair or replace in Kennethmont?
Replacing a fitted bath generally means a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in a single visit. Our bath repair starts from £95. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- We leave the room as we found it
- Fixed prices from your photos
- Every repair guaranteed for a year
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list and guide to resurfacing and replacement costs.
About our bath repair in Kennethmont
Most of our bath repairs take a few hours, and the bath is back in use the next day. You won’t need a plumber or tiler, because nothing is disconnected. We regularly repair cast iron enamel, pressed steel enamel and roll-top & freestanding, and the jobs we see most are a chipped rim or side and an old repair that has yellowed or come loose.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Location
- Kennethmont (AB54)
- Area hub
- Aberdeenshire
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and we start. It normally takes a few hours, depending on the damage, and we’ll keep you posted as we go.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the day after.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Ensure the area is dry
- Let us know about parking or access
Get a quote
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say right away whether it can be repaired.
Related advice
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Other services in Kennethmont
Covering Kennethmont
Kennethmont is about 14 miles west of Inverurie, in Aberdeenshire. Whether you’re in the middle of Kennethmont or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover all 161 towns and villages across Aberdeenshire, from the larger towns to small villages.
We work across AB54. Being close to the B9002, Kennethmont is simple for us to get to. Other places close to Kennethmont include Gartly (3 miles north-west), Backburn (3 miles north), Cottown (3 miles south-west), Rhynie (4 miles west) and Bridgend (5 miles north-west). We also work in nearby towns such as Inverurie (14 miles east), Huntly (7 miles north), Garioch (14 miles east), Kemnay (14 miles south-east), Alford (8 miles south) and Port Elphinstone (15 miles east). For island and remote addresses, ring us first and we will plan the trip.
Around Kennethmont
Around Kennethmont, we work in homes near Kennethmont Parish Church and the streets around them. The closest station to Kennethmont is Insch station, about 4.8 miles east. Nearby you’ll also find Druminnor Castle (3 miles south-west) and Insch War Memorial Hospital (4.9 miles east). For a walk, there’s Hill of Foudland.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Prices and what affects them
Repairs from £95. Each job gets its own fixed price. This is what makes a difference:
- Where the damage is and how we get to it
- How hard the colour is to match
- The material and finish
- What kind of damage it is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your pictures
Two or three clear pictures are typically enough. It helps if you send:
- One picture of the entire bath
- What it’s made of, if you know
- Something in shot to show the size
- Daylight if possible, and no flash reflection
Most clients in Kennethmont get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Kennethmont: your questions answered
Is a holed acrylic bath repairable?
In most cases. Send us a photo of the hole and one from under the bath if you can.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and you’ll get one combined price.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Looking after it afterwards
So the finish stays in good condition for years:
- Protect the bath with a towel when doing jobs nearby
- Fix dripping taps early to stop staining and limescale
- Keep metal cans and razors off the surface
- Rinse it down after each bath
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Honest limits
A few problems are outside what a surface repair can do:
- A bath that moves underfoot, until its support is fixed
- Rust that has eaten right through a steel bath
- Wear across the whole surface, which needs re-enamelling
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
