Aberdeenshire · Scotland
Bath chip & crack repair in Cottown, Aberdeenshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Cottown and across Aberdeenshire. Send pictures for a free, fixed quote.
- Repairs from £95
- Snagging damage from a refit
- Rust by the waste and overflow
Bath repair in Cottown without replacing anything
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Whether it’s rusty patches near the plughole and hairline or through cracks in acrylic, we can typically put it right, on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Cottown (AB54)
- County
- Aberdeenshire
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How to care for the repair
After the repair has cured, a few habits help it last:
- Don’t leave a fresh chip for long
- Protect the bath with a towel when doing jobs nearby
- Don’t leave razors or cans standing in the bath
- A dripping tap stains enamel, so fix it early
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Should you replace it?
A new bath brings a chain of other jobs: tiles along the rim generally crack when it comes out, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Cottown customers choose us
- Colour-matched on site
- Nothing taken out or refitted
- Fixed prices from your photos
- We leave the room as we found it
See our prices page and bath cost comparison.
Cottown and nearby
Cottown is about 17 miles west of Inverurie, in Aberdeenshire. From the centre of Cottown to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Cottown is one of 161 towns and villages in Aberdeenshire we cover.
We work across AB54 and the streets around it. Other places close to Cottown include Rhynie (1 mile north-west), Lumsden (3 miles south-west), Kennethmont (3 miles north-east), Gartly (4 miles north) and Backburn (5 miles north). Further out, we also cover Huntly (8 miles north), Kemnay (15 miles south-east), Alford (8 miles south-east) and Insch (8 miles east). For island and remote addresses, call first so we can plan the visit.
Local landmarks in Cottown
Typical jobs here are in homes near Bridge Of Bogie, among other places. A little further out are Druminnor Castle (0.5 miles east).
How it works
Visits start with a quick look at the job together, so you know exactly what we’re doing. Then the area is sheeted and masked and the work begins. It normally takes a few hours.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you are under no obligation.
Related advice
What a repair cannot fix
Some jobs are not right for a repair, including:
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in parts of an acrylic bath we cannot get to from below
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
How we price bath repair
Repairs from £95. You will not pay by the hour. The price is based on:
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
A repair generally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Getting a price from photos
You can take the photos on your phone. Just ensure we can see:
- A picture taken from further back
- Any earlier repairs or coatings
- Natural light rather than flash
- Something in shot to show the size
Upload a picture of the damage and a wider shot of the whole item, and tell us you’re in Cottown, and we will reply with a fixed price.
Questions from Cottown
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Will the price change on the day?
The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
What areas do you cover?
Across the UK, so Cottown is covered. Our prices are the same everywhere.
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. Then we’ll agree a date.
Towns and villages near Cottown
More services for Cottown
Work for landlords and builders
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
