Highland · Scotland
Bath Repair for Kilmaluag homes
Damaged bath in Kilmaluag? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Impact holes in acrylic
- Scuffs and scratches in the surface
Bath repair in Kilmaluag without replacing anything
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. If you are dealing with damage done while the bathroom was being fitted and impact holes in acrylic, we can generally put it right, on pressed steel enamel, cast iron enamel and whirlpool & spa baths alike.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.
- Area
- Kilmaluag (IV51)
- Region
- Highland
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Kilmaluag
What happens after I send photos?
We come back with a fixed quote, plus dates. There’s no obligation to book.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.
It’s been repaired before. Can you still fix it?
Usually, yes. We remove the old repair before doing a new one, so mention it when you send photos.
I tried a repair kit. Can you fix it?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Do you cover Kilmaluag?
Yes, we do. We send a technician to Kilmaluag for every job, and the price is the same as everywhere else.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Is there a guarantee?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Aftercare tips
It’s all simple stuff:
- Store metal items away from the bath
- A dripping tap stains enamel, so fix it early
- Rinse the bath after use, especially in hard water areas
- Keep abrasive pads and gritty cleaners away from the bath
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
Kilmaluag and nearby
Kilmaluag is in Highland. Whether you are in the middle of Kilmaluag or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Kilmaluag is one of 253 places in Highland where we work.
Here we cover the IV51 postcode area. Close by, we cover Staffin (5 miles south-east), Uig (7 miles south-west), Clachamish (13 miles south), An t-Aodann Ban (15 miles south) and Portree (19 miles south). Remote and island addresses take a little more planning, so it’s best to call first.
Around Kilmaluag
We visit homes around Kilmaluag Retreat. Further afield, we also cover the area around Duntulm Castle (2.2 miles west) and Skye Museum of Island Life (3.3 miles south-west). For a walk, there is Loch Droighinn.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
The process
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and get going once we’ve agreed what we are doing. It usually takes a few hours, depending on the damage, and you can get on with other things while we are there.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the day after.
Getting ready for the visit
- Ensure the area is dry
- Point us to the nearest place to park
- Make sure the room can be ventilated
Get a quote
If you are in Kilmaluag and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
When we would advise against a repair
In fairness, some problems need a different fix:
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
- Acrylic cracks with no access behind them
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
Repair or replace: which is better?
Many people think a damaged bath means a new one. Normally it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Work done at your home or business
- Same prices wherever you are
- Everything repaired in place
- Normally one visit, start to finish
Take a look at our pricing and resurfacing vs replacement cost guide.
Towns and villages near Kilmaluag
More services for Kilmaluag
What affects the price in Kilmaluag
Prices start from £95. There’s no area surcharge for Kilmaluag. The price reflects:
- The material and finish
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- Whether we combine several jobs
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.
Quotes from your pictures
Phone photos are fine. Ensure they show:
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- Any details about the material
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Landlord and trade work in Kilmaluag
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
