Perth and Kinross · Scotland
Bath chip & crack repair in Kinross, Perth and Kinross
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Kinross. Send photos for a free, fixed quote.
- Repairs from £95
- Hairline or through cracks in acrylic
- Chips along the edge of the bath
Bath repair in Kinross without replacing anything
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There is no plumbing to disconnect, the tiles are not touched, and the repaired area is colour matched so it blends in. We regularly repair pressed steel enamel, whirlpool & spa baths and cast iron enamel, and people most often call us about damage done while the bathroom was being fitted and a chip where the taps sit.
A one-year guarantee comes as standard, so you are covered after the visit.
- Area
- Kinross (KY13)
- Region
- Perth and Kinross
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
The process
Visits start with a quick look at the job together, so you know exactly what we’re doing. Then the area is sheeted and masked and the work begins. You can expect it to take a morning or an afternoon, and we will keep you posted as we go.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
- Keep pets and children out of the room while we work
How to get a price
For a price in Kinross, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Read more
Kinross and the surrounding area
Kinross is about 10 miles north of Dunfermline, in Perth and Kinross. Whether you’re in the middle of Kinross or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We work in 107 places in Perth and Kinross. You can also see our page for Edinburgh, about 20 miles away.
Our visits in KY13 are booked in the same way as anywhere else. That includes homes on Station Road, High Street and Mcbain Place. You will find Kinross on the A922 and A977, which makes it straightforward to reach. Nearby, we also work in Milnathort (1 mile north), Balado (1 mile west), Gairney Bank (2 miles south), Gairneybridge (3 miles south) and Wester Balgedie (3 miles east). Within a short drive, we also cover Perth (13 miles north), Auchterarder (12 miles north-west), Letham (13 miles north), Scone (15 miles north), Tulloch (14 miles north) and Oakbank (12 miles north). Kinross is one of the larger places we cover in Perth and Kinross.
Near you in Kinross
Typical jobs here are in homes near The Green Hotel, St Paul's Episcopal Church and Kinross High School and the streets around them. Further afield, we also cover the area around Michael Bruce Cottage Museum (3.8 miles east) and Loch Leven Castle (1.6 miles south-east). Open spaces near Kinross include Loch Leven and Loch Leven National Nature Reserve.
Other services in Kinross
What affects the price in Kinross
Prices start from £95. You won’t pay by the hour. The price is based on:
- Unusual colours or finishes
- Whether we combine several jobs
- Where the damage is and how we get to it
- What kind of damage it is
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
You can normally get a fixed price without us visiting. To help us price it:
- Daylight if possible, and no flash reflection
- Any details about the material
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
Email us a picture of the damage and a wider shot of the whole item, with your KY13 postcode, and we’ll reply with a fixed price.
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Kinross. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- One-year guarantee on every repair
- Most jobs done in one visit
- Dust sheets down, tidy finish
- CHAS, Constructionline and SafeContractor accredited
Read our pricing or resurfacing vs replacement cost guide.
Kinross questions
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
What do you need from me?
Send photos through the quote form or call 0345 017 0787.
Do you come to Kinross?
We do. Repair technicians travel to Kinross from across the region, and the price is the same as everywhere else.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is a cracked acrylic bath repairable?
Frequently, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
When can I have a bath again?
Usually the next day. We confirm the time before we leave.
Can you price it without visiting?
Nearly always. If photos don’t show enough, we will ask for another angle.
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
What we can’t put right
We won’t take on work that will not last, so here’s what a repair can’t put right:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
- Wear across the whole surface, which needs re-enamelling
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
Signs you need bath repair in Kinross
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Get in touch if you’ve noticed:
- An old repair that has yellowed or come loose
- Rust spots around the plughole
- Chips under the taps
- Chips along the edge of the bath
What to look for in a quote
- The length of the guarantee and what it covers
- Who turns up on the day
- How the room is protected while they work
- How to care for the finish
Landlords, agents and businesses in Kinross
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
