Perth and Kinross · Scotland
Bath chip & crack repair in Scone, Perth and Kinross
Bath repair in and around Scone: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Scuffs and scratches in the surface
- Damage done while the bathroom was being fitted
Bath repair in Scone without replacing anything
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, the tiles are not touched, and the repaired area is colour matched so it blends in. Whether it’s scuffs and scratches in the surface and chips along the edge of the bath, we can help.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Scone (PH2)
- Region
- Perth and Kinross
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What bath repair costs
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- What kind of damage it is
- Whether old repairs or coatings need taking off
- How much damage there is
- How hard the colour is to match
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your pictures
Photographing the damage takes a minute. Please include:
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- A photo taken from further back
To get a price, send a couple of photos using our quote form or call us. We will tell you honestly if a repair is the right fix.
The process
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and we start. Allow a few hours, and we will keep you posted as we go.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the following day.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Let us know which floor the room is on
- Make sure the area is dry
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.
Advice
Also near Scone
Other services in Scone
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Scone: your questions answered
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you repair something that is been repaired before?
Most of the time. Tell us what was done before and we’ll plan for it.
When can I have a bath again?
Normally the following day. We confirm the time before we leave.
Is my repair covered?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
- A bath worn all over, where resurfacing makes more sense
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
Signs you need bath repair in Scone
A cracked acrylic bath normally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.
Most people contact us after spotting something like this:
- An old repair that has yellowed or come loose
- Holes from dropped items
- Scuffs and scratches in the surface
- Damage done while the bathroom was being fitted
What your quote should include
- What happens if the damage is worse than the pictures show
- Whether the price covers travel
- How long the guarantee is and what it covers
- How soon you can use it again
Our work in Scone
Scone is about 2 miles north-east of Perth, in Perth and Kinross. Jobs in Scone are booked in like any other job: a fixed quote from your photos, then a visit to do the work. Scone is one of 107 towns and villages in Perth and Kinross we cover. You can also see our page for Edinburgh, about 34 miles away.
Postcode districts we cover here: PH2. We regularly work on streets such as Woollcombe Square, Union Road and Mansfield Road and the roads around them. Nearby, we also work in Stormontfield (3 miles north-west), Tulloch (3 miles west), Letham (3 miles south-west), Luncarty (3 miles north-west) and Hillyland (3 miles west). We also work in nearby towns such as Blairgowrie and Rattray (12 miles north), Auchterarder (14 miles south-west), Kinross (15 miles south), Alyth (15 miles north-east), Coupar Angus (10 miles north-east) and Oakbank (3 miles south-west). As one of the bigger places in Perth and Kinross, Scone is somewhere we visit often.
Local landmarks in Scone
Typical jobs here are in homes near North Inch and United Free Church and the streets around them. The nearest railway station is Perth station, roughly 2.4 miles south-west of the centre. Other landmarks nearby include Scone Palace (1.4 miles west) and Perth Royal Infirmary (1.4 miles south). Open spaces near Scone include Kinnoull Hill.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Perth and Kinross and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
Repair or replace in Scone?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. We charge the same wherever you are, so there is no premium for Scone. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- One-year guarantee on every repair
- Work done at your home or business
- Everything repaired in place
- Free fixed quotes from pictures
Take a look at our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
