Perth and Kinross · Scotland

Bath Repair in Tulloch

Bath repair for Tulloch, without a refit. Get a fixed quote from your photos, then we come to you.

  • Repairs from £95
  • Scratches you can feel with a fingernail
  • A failed DIY repair that’s discoloured or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Tulloch

Should you replace it?

If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why us?

  • No extra charge for your area
  • CHAS and Constructionline accredited
  • Colour-matched on site
  • Dust sheets down, tidy finish

Take a look at our pricing and guide to resurfacing and replacement costs.

How we handle bath repair in Tulloch

We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. Whether it’s impact holes in acrylic and a cracked acrylic bath, we can typically put it right, whatever the material.

You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Where
Tulloch (PH1)
County
Perth and Kinross
Warranty
A year, on every repair
Price
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026

Our work in Tulloch

Tulloch is about 1 mile north-west of Perth, in Perth and Kinross. Whether you’re in the middle of Tulloch or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover 107 places in Perth and Kinross. Our jobs stretch from Tulloch to Edinburgh (about 34 miles away).

Our visits in PH1 are booked in the same way as anywhere else. We regularly work on streets such as Arran Road, Crieff Road and Milton Road and the roads around them. Main roads around Tulloch include the A9, which makes travel easy. Close by, we cover Hillyland (1 mile south-west), Ruthvenfield (1 mile west), Letham (1 mile south), Huntingtower (1 mile south-west) and Stormontfield (3 miles north). Further out, we also cover Blairgowrie and Rattray (13 miles north), Crieff (14 miles west), Auchterarder (12 miles south-west), Kinross (14 miles south), Coupar Angus (12 miles north-east) and Rattray (13 miles north-east). Tulloch is one of the larger places we cover in Perth and Kinross.

Around Tulloch

In Tulloch, that means homes near North Inch, Bertha Park High School and St John's Academy. The closest station to Tulloch is Perth station, roughly 1.9 miles south-east of the centre. A little further out are Murray Royal Hospital (2.1 miles south-east) and Huntingtower Castle (0.8 miles west). Not far away are St Magdalene's Hill.

Map of Tulloch © OpenStreetMap contributors

What we are called out for in Tulloch

A cracked acrylic bath normally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move.

Signs it’s time to call us include:

  • Scratches you can feel with a fingernail
  • Hairline or through cracks in acrylic
  • Chips along the edge of the bath
  • Chips caused by builders

What to look for in a quote

  • How long it needs to cure
  • Whether cleaning and preparation are in the price
  • Whether the colour is mixed to match
  • What happens if the damage is worse than the pictures show

10 questions to ask before booking

How to look after the repair

Looking after the surface is easy:

  • Protect the bath with a towel when doing jobs nearby
  • Get a dripping tap fixed promptly
  • Avoid scourers, wire wool and gritty cream cleaners
  • Don’t leave a fresh chip for long

Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.

Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.

What a repair can’t fix

In fairness, there are a few things a repair won’t fix:

  • A bath that moves underfoot, until its support is fixed
  • Acrylic cracks with no access behind them
  • A steel bath rusted through

If in doubt, send pictures and we will say what we think.

Materials we work on in Tulloch

  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding

What bath repair costs

Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:

  • Unusual colours or finishes
  • The material
  • How many items we do on one visit
  • Previous DIY repairs that have to come out

A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.

Send photos for a quote

You can usually get a fixed quote without us visiting. To make it quick:

  • Whether it’s been repaired or coated before
  • One sharp close-up of the damage
  • The material, if you know it
  • Natural light rather than flash

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and you are under no obligation.

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams in Perth and Kinross and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Different materials, different repairs

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.

What happens on the day

Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which generally takes a few hours. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. First, we check the damage against your pictures and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Keep a parking space free if you can
  • Ensure the room can be ventilated
  • Mention any earlier repairs or resurfacing

Ask for a price

Send us photos of the damage and one of the whole item, with your PH1 postcode, and we will reply with a fixed quote.

Get a fixed quote

Read more

Tulloch: your questions answered

Will the repair show?

We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you do work for letting agents?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

What happens after I send photos?

We come back with a fixed price, plus dates. There is no obligation to book.

Can you repair a crack in an acrylic bath?

Frequently, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.

Can you repair a hole in a bath?

Often, if there’s access underneath. We back the hole, fill it and refinish the surface.

Can you quote from photos?

Generally, yes. A close-up and a wider photo are enough to give a fixed quote.

Can I add another job to the visit?

Yes, and it’s often cheaper. Just add the extra items to your pictures and we will quote them together.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.