Perth and Kinross · Scotland
Bath chip & crack repair in Balado, Perth and Kinross
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Balado, with a one-year guarantee on every repair.
- Repairs from £95
- Impact holes in acrylic
- Damage beneath the taps

About our bath repair in Balado
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath and the tiles around it. You can usually use the bath the following day. If you’re dealing with deep scratches in acrylic and a failed DIY repair that’s discoloured or lifting, we can normally put it right.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Location
- Balado (KY13)
- Area hub
- Perth and Kinross
- Guarantee
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026

Do you need bath repair in Balado?
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
The most common problems we’re called about are:
- A kit repair that didn’t last
- Damage done while the bathroom was being fitted
- A hole punched through by something heavy
- A chip where the taps sit
Comparing quotes
- How the colour is matched
- Whether the price is fixed and includes VAT
- What aftercare is recommended
- What preparation is included
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Honest limits
We’ll always be straight with you, so here’s what a repair cannot fix:
- Metal that has corroded all the way through
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
Balado questions
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Will the repair show?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Can a cracked acrylic bath be fixed?
Frequently, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How much does bath repair cost in Balado?
Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Do you come to Balado?
We do. We send a technician to Balado for every job, and the price is the same as everywhere else.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Towns and villages near Balado
Also in Balado
Where we work around Balado
Balado is about 10 miles north of Dunfermline, in Perth and Kinross. Jobs in Balado are booked in like any other job: a fixed quote from your photos, then a visit to do the work. We work in 107 places in Perth and Kinross, from the larger towns to small villages. Our jobs stretch from Balado to Edinburgh (about 21 miles away).
We cover every part of KY13. Whether you live on Dawson's Court, The Nurseries and Killochburn Crescent or a nearby road, we can come to you. We also travel to Kinross (1 mile east), Milnathort (2 miles north-east), Carnbo (3 miles west), Gairney Bank (3 miles south-east) and Gairneybridge (3 miles south-east). Within a short drive, we also cover Perth (13 miles north), Auchterarder (11 miles north-west), Letham (13 miles north), Scone (15 miles north), Tulloch (14 miles north) and Oakbank (13 miles north).
What’s near Balado
In Balado, that means homes near Kinross High School. Well-known places in the area include Loch Leven Castle (2.7 miles east). For a walk, there’s Benarty Hill and Loch Leven.
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, pictures and access details.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Don’t leave razors or cans standing in the bath
- Have new chips seen to early
- Fix dripping taps early to stop staining and limescale
- Clean with warm water and a mild detergent
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Should you replace it?
People often assume a cracked or chipped bath has to come out. In most cases it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Our bath repair starts from £95. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- Rooms protected and left tidy
- No need to remove anything
- Repair technicians who travel to you, UK-wide
- Colours mixed by hand to suit your surface
Read our full price list or guide to resurfacing and replacement costs.
What we do, step by step
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and we start. It normally takes two to three hours for most chips, and we’ll keep you posted as we go.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can usually use the bath the day after.
How to prepare
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
- Make sure the room can be ventilated
Get a quote
Send us photos of the damage and a wider shot of the whole item, and tell us you are in Balado, and we will reply with a fixed price.
Advice
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.

