Knowsley · England
Bath chip & crack repair in Kirkby, Knowsley
We travel to Kirkby for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Chips on the rim or sides
- A failed DIY repair that is discoloured or lifting
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Bath repair at your home in Kirkby
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. You can generally use the bath the day after. If you are dealing with damage done while the bathroom was being fitted and a failed DIY repair that’s discoloured or lifting, we can generally put it right, on acrylic, whirlpool & spa baths and pressed steel enamel alike.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.
When to call us in Kirkby
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Most people contact us after spotting something like this:
- Chips on the rim or sides
- Chips under the taps
- Rust by the waste and overflow
- Holes from dropped items
Before booking anyone
- A fixed price, and whether VAT is included
- What the guarantee covers, and for how long
- Whether they match the colour on site
- Whether cleaning and preparation are in the price
Kirkby and the surrounding area
Kirkby is about 6 miles north of Liverpool, in Knowsley. From the centre of Kirkby to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Kirkby is one of 5 towns and villages in Knowsley where we work. You can also see our page for Liverpool, about 6 miles away.
Our repair technicians cover all of L32, L33, L10 and L31. From Market Square, Station Road and Irlam Drive or anywhere nearby, we can come to you. With the A506 and A580 close by, Kirkby is simple for us to get to. Nearby, we also work in Gillmoss (2 miles south), Knowsley (3 miles south-east), Stockbridge Village (3 miles south), Dovecot (5 miles south) and Page Moss (5 miles south).
Near you in Kirkby
Typical jobs here are in homes near Kirkby CofE Primary School, St Chad's Church and The Market Tavern, among other places. You will also find All Saints Catholic High School (less than half a mile south) and Valley Park (under half a mile west). Kirkby’s nearest station is Headbolt Lane station, about 0.6 miles north of the centre. Well-known places in the area include Merseyside Fire & Rescue Museum (3.4 miles west) and Fazakerley (2 miles south-west).
How the visit works
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes a few hours. At the end we talk you through the curing time and the aftercare.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Let us know about parking or access
- Open a window if you can
How to get a price
Email us photos of the damage and a wider shot of the whole item, and tell us you’re in Kirkby, and we’ll come back with a fixed quote.
Advice
Why repair rather than replace?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
Why Kirkby clients choose us
- Dust sheets down, tidy finish
- Technicians who travel to you, UK-wide
- One visit for most repairs
- Nothing taken out or refitted
Take a look at our pricing or guide to resurfacing and replacement costs.
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Put a towel in the bath if you are working above it
- Get a dripping tap fixed promptly
- Rinse the bath after use, especially in hard water areas
- Keep abrasive pads and gritty cleaners away from the bath
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Prices and what affects them
Repairs from £95. Each job gets its own fixed quote. These are the things that affect it:
- Unusual colours or finishes
- The material
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
Our prices are the same across the UK, so there is no premium for Kirkby. What changes the price is the job itself: the material, the amount of damage and how many items.
Send photos for a quote
We price nearly every job from photos. This is what we need:
- One picture of the entire bath
- Your postcode, so we can check dates
- Natural light rather than flash
- A coin beside the damage so we can judge size
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.
Kirkby: your questions answered
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Will the price change on the day?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Can rust on a bath be repaired?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
What areas do you cover?
Everywhere in the UK, Kirkby included. There’s no extra charge for travel.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
How long before I can use the bath?
Typically within a day, depending on the repair.
Can you repair several things at once?
Of course, and it generally saves money. Send pictures of everything together and we will quote them together.
Can you quote from photos?
In nearly every case. If pictures do not show enough, we will ask for another angle.
Landlords, agents and businesses in Kirkby
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
What else we do in Kirkby
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
