Aberdeenshire · Scotland
Bath Repair for Kirktown homes
Damaged bath in Kirktown? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- A chipped rim or side
- Damage done while the bathroom was being fitted
Kirktown and the surrounding area
Kirktown is about 4 miles north-west of Peterhead, in Aberdeenshire. We travel to homes and businesses in Kirktown, so nothing has to leave your home. Kirktown is one of 161 places in Aberdeenshire we cover.
We work across the AB42 postcode area. That includes homes on Netherhill Road and Kinloch Road and the roads around them. Other places close to Kirktown include St Fergus (1 mile east), Rora (2 miles south-west), Keyhead (3 miles north-west), Inverugie (3 miles south) and Downiehills (3 miles south). Further out, we also cover Peterhead (4 miles south-east), Fraserburgh (11 miles north-west), Roanheads (4 miles south-east), Clerkhill (4 miles south-east), Port Henry (4 miles south-east) and Mintlaw (6 miles south-west).
What’s near Kirktown
Locally, our jobs take us to homes close to St Fergus Parish Church and Churchyard, among other places. Well-known places in the area include Inverugie Castle (2.4 miles south) and Ugie Hospital (3.6 miles south-east). Green spaces nearby include Loch of Strathbeg and Meet Hill.
Bath repair in Kirktown without replacing anything
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. You can normally use the bath the day after. Common call-outs are for a failed DIY repair that’s discoloured or lifting and a chip where the taps sit, across whirlpool & spa baths, pressed steel enamel and acrylic.
All our work comes with our one-year guarantee, wherever you are in Aberdeenshire.
- Location
- Kirktown (AB42)
- Area hub
- Aberdeenshire
- Cover
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Keeping it looking good
To keep it looking its best for years:
- Check that an acrylic bath doesn’t move when you stand in it
- Keep metal cans and razors off the surface
- Fix dripping taps early to stop staining and limescale
- Do not scrub with anything abrasive
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
What affects the price in Kirktown
Repairs from £95. We do not charge extra for travel to Kirktown. The price comes down to:
- Whether we combine several jobs
- The type of damage
- What the surface is made of
- How many areas need work
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Send photos for a quote
It only takes a minute to photograph the damage. Try to send:
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Do you need bath repair in Kirktown?
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Signs it’s time to call us include:
- Rusty patches near the plughole
- Scratches you can feel with a fingernail
- A chipped rim or side
- Chips caused by builders
Before you book anyone
- Whether the price is fixed and includes VAT
- What happens if they find more damage
- How long the guarantee is and what it covers
- Whether the price covers travel
Nearby places to Kirktown
What else we do in Kirktown
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
What you get with us
- Work done at your home or business
- One price list for the whole UK
- We’ll tell you if it’s not worth repairing
- Normally one visit, start to finish
Take a look at our prices page or bath cost comparison.
FAQs for Kirktown
Which areas do you work in?
We work UK-wide, and that includes Kirktown. Prices don’t change with location.
How long before I can use the bath?
Most baths can be used the day after. We confirm the time before we leave.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Cracks in parts of an acrylic bath we can’t get to from below
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Kirktown
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
How the visit works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for a morning or an afternoon from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can usually use the bath the next day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Open a window if you can
- Let us know which floor the room is on
How to get a price
Email us a photo of the damage and a wider shot of the whole item, and tell us you’re in Kirktown, and we will come back with a fixed quote.
Related advice
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
