Hampshire · England
Bath chip & crack repair in Little London, Hampshire
Damaged bath in Little London? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Chips under the taps
- An old repair that has yellowed or come loose
Bath repair in Little London, done in place
Most of our bath repairs take a few hours, and you can normally bathe again the day after. There is no need to book a plumber or tiler, because the bath doesn’t move. Common call-outs are for damage beneath the taps and rust by the waste and overflow, in pressed steel enamel, whirlpool & spa baths and roll-top & freestanding.
A one-year guarantee comes as standard, so you are covered after the visit.
- Area
- Little London (RG26)
- Area hub
- Hampshire
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Towns and villages near Little London
Also in Little London
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Cracks in parts of an acrylic bath we cannot get to from below
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
What happens on the day
Visits start with a quick look at the job together, so you know exactly what we’re doing. After that, protection goes down around the work area and the work begins. It normally takes a morning or an afternoon, and we will tell you if anything changes.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
- Open a window if you can
Ask for a price
The quickest way to a price is to send a couple of photos through our quote form or call us. We will say right away if a repair is the right fix.
Advice
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. The price reflects the work involved, not where you live. You’ll see the full price before booking, with no extras added later.
Why us?
- One price list for the entire UK
- CHAS, Constructionline and SafeContractor accredited
- Rooms protected and left tidy
- A year’s guarantee on all work
See our prices page or guide to resurfacing and replacement costs.
Little London: your questions answered
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before.
Do you charge for travel?
There is no separate call-out charge. Your fixed price includes everything.
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
How long before I can use the bath?
Generally the next day. We will tell you the exact curing time when we finish.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
Can you repair a hole in a bath?
Typically, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
How do I book?
Photos of the damage, a photo of the entire bath and your postcode. Then we’ll agree a date.
Do you need bath repair in Little London?
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
Common reasons people in Little London contact us are:
- A chip where the taps sit
- A hole punched through by something heavy
- A chipped rim or side
- Rusty patches near the plughole
Comparing quotes
- How long the guarantee is and what it covers
- Whether cleaning and preparation are in the price
- Who will actually do the work
- How your room will be protected
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- Store metal items away from the bath
- Don’t scrub with anything abrasive
- Put a towel in the bath if you are working above it
- Check that an acrylic bath doesn’t move when you stand in it
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
Little London and nearby
Little London is about 2 miles south-east of Tadley, in Hampshire. Wherever you are in the RG26 postcode area, we carry out the work at your property. We work in all 683 towns and villages across Hampshire. Our nearest city page is London, about 45 miles away.
Every address in RG26 is within our area, from the main roads to the quietest streets. You’ll find streets such as Silchester Road and New Road, all of which we cover. We also cover the places around Little London: Pamber Green (1 mile west), Pamber End (1 mile south-west), Salters Heath (1 mile south-west), Silchester (2 miles north) and Pamber Heath (2 miles north). Within a short drive, we also cover Basingstoke (5 miles south), Farnborough (15 miles east), Fleet (12 miles east), Alton (14 miles south-east), Yateley (12 miles east) and Hook (7 miles south-east).
Local landmarks in Little London
We visit homes around Saint Stephen's Church and The Queens College Arms, among other places. Little London’s nearest station is Bramley (Hants) station, about 2.1 miles east. A little further out are Calleva Museum (1.7 miles north) and Basing House (5 miles south-east). Green spaces nearby include Daneshill Park Woods.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
About our accreditations · Every repair comes with a one-year guarantee.
