Redcar and Cleveland · England
Bath chip & crack repair in Liverton Mines, Redcar and Cleveland
Local bath repair for Liverton Mines: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Scratches you can feel with a fingernail
- A chip where the taps sit
Our work in Liverton Mines
Liverton Mines is about 7 miles east of Guisborough, in Redcar and Cleveland. Whether you are in the middle of Liverton Mines or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our technicians cover all 48 towns and villages across Redcar and Cleveland, from the larger towns to small villages. You can also see our page for Newcastle upon Tyne, about 42 miles away.
We cover every part of the TS13 postcode area. That includes homes on School Lane, St Helens Walk and Liverton Terrace and the roads around them. Other places close to Liverton Mines include Kilton (1 mile west), Carlin How (1 mile north), Skinningrove (1 mile north), Liverton (1 mile south) and Kilton Thorpe (1 mile west). Within a short drive, we also cover Redcar (8 miles north-west), Guisborough (7 miles west), Eston (10 miles west), Marske-by-the-Sea (6 miles north-west), Grangetown (10 miles west) and Skelton-in-Cleveland (4 miles west).
Around Liverton Mines
Our clients here include homes close to Freebrough Academy, St Hilda and Handale Primary School. For rail, the closest station is Saltburn station, roughly 3.8 miles north-west. Well-known places in the area include Kilton Castle (0.6 miles west). Open spaces near Liverton Mines include Freebrough Hill.
How we handle bath repair in Liverton Mines
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, generally in a single visit. We work on acrylic, pressed steel enamel and cast iron enamel, and common reasons people contact us are a failed DIY repair that’s discoloured or lifting and chips along the edge of the bath.
Big or small, it’s backed by a one-year guarantee.
- Where
- Liverton Mines (TS13)
- Region
- Redcar and Cleveland
- Guarantee
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- If an acrylic bath flexes, have its feet adjusted
- Don’t leave razors or cans standing in the bath
- Cover the bath during DIY or decorating
- Clean with warm water and a mild detergent
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams and rinse after use.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
Places near Liverton Mines
Other services in Liverton Mines
Should you replace it?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why us?
- Rooms protected and left tidy
- Repair technicians who travel to you, UK-wide
- Honest advice, even when it means no job
- Colour mixed on the day to match
See our full price list or resurfacing vs replacement cost guide.
When to call us in Liverton Mines
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, often before anyone notices. We repair snagging damage like this regularly.
Look out for these signs:
- Damage done while the bathroom was being fitted
- A chip where the taps sit
- An old repair that has yellowed or come loose
- Scratches you can feel with a fingernail
What to look for in a quote
- Who will actually do the work
- Whether there are any call-out or travel charges
- What aftercare is recommended
- What happens if they find more damage
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We clean up when we are done and tell you when it’s ready to use.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the day after.
How to prepare
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
- Make sure the room can be ventilated
Get a quote
Upload a photo of the damage and a wider shot of the whole item, and tell us you’re in Liverton Mines, and we’ll come back with a fixed quote.
Related advice
What a repair cannot fix
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- Flexing caused by a failed cradle or loose feet
- Cracks in parts of an acrylic bath we cannot get to from below
- Wear across the whole surface, which needs re-enamelling
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Questions from Liverton Mines
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Do you come to Liverton Mines?
Yes, we do. We send a technician to Liverton Mines for every job, and the price is the same as everywhere else.
Can you repair a failed DIY repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Can you repair a crack in an acrylic bath?
Generally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Do you repair coloured baths?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
What affects the price in Liverton Mines
Repairs from £95. Each job gets its own fixed price. These are the things that affect it:
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- How much damage there is
We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
When you take your pictures, a few simple things make all the difference:
- Where you are, by postcode
- Natural light rather than flash
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. There is no charge for the quote and no obligation.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We regularly work with letting and managing agents. Send the address, pictures and access details.
About our accreditations · Every repair comes with a one-year guarantee.
