Redcar and Cleveland · England
Bath chip & crack repair in Liverton, Redcar and Cleveland
Bath repair for Liverton, without a refit. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- Scratches you can feel with a fingernail
- Damage beneath the taps
Honest limits
A few problems are outside what a surface repair can do:
- Acrylic cracks with no access behind them
- Leaking fittings, which need a plumber
- A steel bath rusted through
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
About our bath repair in Liverton
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and common reasons people get in touch are a hole punched through by something heavy and chips under the taps.
Every job is backed for twelve months. We return to put right any problem with the work.
- Where
- Liverton (TS13)
- Region
- Redcar and Cleveland
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Liverton
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
If you manage property in Liverton, we’ll quote for several properties at once. Send photos for each one and we will price them together.
About Liverton
Liverton is about 6 miles east of Guisborough, in Redcar and Cleveland. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Liverton is one of 48 towns and villages in Redcar and Cleveland where we work. Our jobs stretch from Liverton to Newcastle upon Tyne (about 43 miles away).
All of TS13 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Liverton Road and Moorsholm Lane. Neighbouring places we cover include Liverton Mines (1 mile north), Kilton (2 miles north-west), Kilton Thorpe (2 miles north-west), Moorsholm (2 miles south-west) and Carlin How (2 miles north). Further out, we also cover Redcar (8 miles north-west), Guisborough (6 miles west), Eston (10 miles west), Marske-by-the-Sea (6 miles north-west), Grangetown (10 miles west) and Skelton-in-Cleveland (4 miles north-west).
Near you in Liverton
Our customers here include homes close to The Water Wheel Inn and Church of St Michael, among other places. Liverton’s nearest station is Saltburn station, about 4.5 miles north-west of the centre. A little further out are Kilton Castle (1.2 miles north-west). Open spaces near Liverton include Freebrough Hill.
FAQs for Liverton
When can I have a bath again?
Normally by the following day, depending on the repair.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
What do you need from me?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Is a holed acrylic bath repairable?
Frequently, if there is access underneath. The hole is backed, filled and refinished to match.
Can you redo an old repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
What we’re called out for in Liverton
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
You may need us if you’ve spotted:
- Holes from dropped items
- A failed DIY repair that is discoloured or lifting
- Deep scratches in acrylic
- Chips on the rim or sides
Questions to ask before you book
- Whether the price covers travel
- How soon you can use it again
- Aftercare advice
- A fixed price, and whether VAT is included
Repair or replace: which is better?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Prices start from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Liverton clients choose us
- We will tell you if it’s not worth repairing
- Rooms protected and left tidy
- We come to you, anywhere in the UK
- A year’s guarantee on all work
See our prices page or resurfacing vs replacement cost guide.
How it works
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a few hours, depending on the damage, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Before we arrive
- Let the surface dry out before the visit
- Make sure the room can be ventilated
- Keep children and pets away from the room on the day
Getting a price
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Advice
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Also near Liverton
Also in Liverton
Aftercare tips
How the surface is treated afterwards matters:
- Rinse it down after each bath
- Don’t leave a fresh chip for long
- Stick to mild cleaners and a soft cloth
- Get a dripping tap fixed promptly
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Prices and what affects them
Prices start from £95. We price every job individually, from your photos. The main factors are:
- How much damage there is
- Unusual colours or finishes
- The type of damage
- Any earlier repairs that need removing first
Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your photos
Before you send pictures, a few simple things make all the difference:
- One sharp close-up of the damage
- Your postcode, so we can check dates
- Details of any past repairs
- Good light, ideally daylight, without flash glare
To get a price, send two or three photos through our quote form or ring us. We will tell you honestly if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
