Northumberland · England
Bath Repair for Longhorsley homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Longhorsley, carried out at your home and guaranteed for a year.
- Repairs from £95
- Holes from dropped items
- A kit repair that didn’t last
Aftercare tips
Looking after the surface is easy:
- If an acrylic bath flexes, have its feet adjusted
- Store metal items away from the bath
- Avoid scourers, wire wool and gritty cream cleaners
- Clean with warm water and a mild detergent
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Bath repair at your home in Longhorsley
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, usually in a single visit. Common call-outs are for a failed DIY repair that’s discoloured or lifting and cracks in an acrylic bath, on whirlpool & spa baths, cast iron enamel and pressed steel enamel.
Every job is backed for twelve months in Longhorsley and everywhere else. If something goes wrong with the work, we come back.
- Location
- Longhorsley (NE65)
- County
- Northumberland
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Longhorsley
More services for Longhorsley
Repairing versus replacing in Longhorsley
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Our bath repair starts from £95. Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- Same prices wherever you are
- Most jobs done in one visit
- Honest advice, even when it means no job
- Every repair guaranteed for a year
Read our pricing and guide to resurfacing and replacement costs.
Our work in Longhorsley
Longhorsley is about 7 miles north-west of Morpeth, in Northumberland. From the centre of Longhorsley to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 189 towns and villages in Northumberland. We work right across the region, from Longhorsley to Newcastle upon Tyne (18 miles away).
Postcode districts we cover here: NE65. Jobs here include addresses on Reivers Gate, North Road and Wilding Place. If you’re just outside Longhorsley, we cover Burgham (2 miles north-east), Eshott (4 miles north-east), West Thirston (4 miles north-east), The Lee (4 miles north-west) and Longframlington (4 miles north). We also work in nearby towns such as Blyth (13 miles south-east), Cramlington (13 miles south-east), Ashington (9 miles south-east), Morpeth (7 miles south-east), Bedlington (10 miles south-east) and Alnwick (12 miles north).
Landmarks near Longhorsley
Our clients here include homes close to Shoulder Of Mutton Inn, Longhorsley St Helen's Church of England Aided First School and Church of St Helen, among other places. Other landmarks nearby include St George's Park (5.8 miles south-east) and Brinkburn Low Ward (2.7 miles north).
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
FAQs for Longhorsley
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Is a bath repair durable?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Can you repair several things at once?
Of course, and it normally saves money. Just add the extra items to your pictures and you will get one combined price.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
How we price bath repair
Prices start from £95. We give every job a fixed quote from pictures. These are the things that affect it:
- What kind of damage it is
- Doing more than one item at once
- The colour and finish to match
- The material
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed price
It only takes a minute to photograph the damage. Try to send:
- One picture of the whole bath
- The material, if you know it
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
When to call us in Longhorsley
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.
The most common problems we are called about are:
- Chips on the rim or sides
- Rust by the waste and overflow
- Impact holes in acrylic
- An old repair that has yellowed or come loose
What your quote should include
- How soon you can use it again
- Whether there are any call-out or travel charges
- What preparation is included
- Whether a trained technician does the job
What we cannot put right
To be straight with you, there are a few things a repair won’t fix:
- Flexing caused by a failed cradle or loose feet
- Cracks in parts of an acrylic bath we can’t get to from below
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
What happens on the day
We agree an arrival time beforehand, so you’re not left guessing. Once we’re there, the work takes a morning or an afternoon in most cases. We leave the room clean and ready to use once it has cured.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the day after.
Before we arrive
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
Getting a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Related advice
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
About our accreditations · Every repair comes with a one-year guarantee.
